The line of flyaway antenna is a parabolic antenna with diameter of 1.2m. According to operating frequency, it is divided into 1.2m Ku band, Ka band, and X band antennas.
Structural Characteristics of the Flyaway Antenna
One person assembly in less than 5 minutes. No tools are required to setup or disassemble the flyaway antenna.
The antenna case is constructed out of an impact-resistant high strength polymer material. flat flexible foaming gasket, all hinge axis are stainless steel material.
This selection of mobile earth station antenna can be packed in one case or multi-case in according to request of the user.
Antenna Diameter | 1.2m | |||||
Operating Frequency, GHz | Ku | Ka | X | |||
RX | TX | RX | TX | RX | TX | |
10.95~12.75 | 13.75~14.5 | 17.7-20.2 20.2-21.2 | 27.5-30 30-31 | 7.25-7.75 | 7.9-8.4 | |
Gain(dbi ) | 42.5dB | 43.5dB | 45.8dB | 49dB | 37.5dB | 38.2dB |
Model | SC120KU | SC120KA | SC120X | |||
VSWR | 1.25:1 | 1.3:1 | 1.25:1 | |||
Beam width (-3db) | 1.5° | 1.2° | 0.84° | 0.55° | 2.20° | 2.03° |
Feed Interface | WR-75 | WR42 | WR28 | WR112 | ||
Polarization | Linear | Linear/circular | Circular | |||
Feed insertion loss | 0.2dB | 0.2dB | 0.2dB | |||
Cross Polarization isolation On Axis Within1dB Beam width | 35 30 | 35 26 | 21.3 21.3 | |||
Port to port isolation Tx to Rx dB | ≧85 | ≧85 | ≧85 | |||
Side lobes | IESS 601 STD G | |||||
Materials of Reflectors | Carbon fiber | |||||
Antenna Weight | 24kgs | |||||
Packing size | The antenna can be packed in one case or multiple cases according to user request, so the packing size will be set during order confirmation. | |||||
Antenna Pointing Range Elevation Azimuth | 0 °~90 °(Continuous) 360 °(Continuous) | |||||
Surface Accuracy(RMS) | ≤0.5mm | |||||
Temperature | -15 ℃ ~ 60℃ | |||||
Solar Radiation | 1000kcal/hm2 | |||||
Operational Wind Speed | 40km/h no ballasts/anchors, 72km/h with ballasts | |||||
Survival Wind Speed | 145km/h with ballast/ anchors |