Digital SMD Soldering Desoldering Hot Air Preheat BGA Rework Station, Item WEP-853AAA

The WEP-853AAA BGA rework station is equipped with a pre-heating platform in addition to a hot air gun and soldering iron. This soldering equipment is more practical than similar rework stations as the integrated rework station can satisfy almost all applications thanks to its 3-in-1 design, compact structure, and powerful and economical functions.

The pre-heating platform heats up the processed IC components before de-soldering and soldering processes, resulting in higher efficiency and space saving performance.

Technical Parameters

Rated voltage	AC 220V±10% 50Hz
Machine power	≤1270W
300℃The thermostat power of (high-speed PID programmable energy saving)	250W±10％
Working environment	0～40℃ relative humidity＜80％
Storage environment	－20～80℃ relative humidity＜80％
Body dimension	L320xW220xH100mm±5mm
Weight	6.5kg

Parts parameters	Hot air gun	853AAA Soldering iron
Work voltage	AC 220V±10% 50Hz	AC 26V±10% 50Hz
Output power	650W	75W
Temperature range	100℃～480℃	200℃～480℃
Airflow type	Brushless fan	---
Air Flow	120L/min	---
Temperature Stability	±1℃ (static)	±1℃ (static)
Display Type	red LED display	Red LED display
Temperature correction type	PID digital program	PID digital program
PID Temperature correction cycle	Rapidly 20ms	High-speed 100ms
Heating elements	Ceramic skeleton heater	Imported heater
Tip ground impedance	---	＜2Ω
Tip of ground voltage	---	＜2mV

Pre-heater platform

Work voltage	AC 220V±10% 50Hz
Output power	600W
Pre-heating platform area	120X120mm
Pre-heating platform material	Ceramic heating material
Temperature sensor	Type K thermocouple
Temperature range	50℃--350℃

Features

WEP853AAA soldering iron wire adopts thermal resistant silicon material, which displays no obvious damage after 30 seconds contact with a 300℃ soldering iron tip.
Brand name high-power heater with superfast heating time, is applicable for the soldering and de-soldering of large terminals, welding joints other than regular welded workpieces.
Pioneer technology in this industry regarding its handle protection function, the air gun and soldering iron handles have to be placed on the holder when powering on the rework station to begin normal functioning. The main reason is for safety to prevent the handles from causing damage if left in an unsafe location.
If you need quick after-sales support

Please don't hesitate to send an email to !