E70T-1C Gas Shielded Mild Steel Flux Cored Wire

Send Message Request a Quote

The E70T-1C gas shielded mild steel flux cored wire is the welding consumable adopts the titanium slag and involves utilization of CO2 shielding gas. This welding wire is specially designed only for flat and horizontal position welding, and is highly capable of catering to demands for high welding speed and current.

Grounded on remarkable mechanical properties, our mild steel flux cored wire is born with high deposition rate and low spatter. Moreover, this kind of welding accessory has been proved to be ideal for butt welding and horizontal fillet welding of all kinds of steel slab with medium thickness applied in shipbuilding, bridge and vehicle, etc.

Standards
GB/T10045-2008 E500T-1
AWS A5.20 E70T-1C

Chemical composition of deposited metal (%)

	C	Si	Mn	P	S
Standard	/	≤0.91	≤1.75	≤0.04	≤0.03
Typical	0.07	0.41	1.48	0.017	0.012

Mechanical properties of deposited metal

	Rm (MPa)	Rp0.2 (MPa)	A5 (%)	Akv (J)
	Rm (MPa)	Rp0.2 (MPa)	A5 (%)	-18℃	-29℃
Standard	≥480	≥400	≥22	≥27	≥27
Typical	610	530	26	55	44

Recommended welding data (DC , shielding gas: CO2)

Wire diameter (mm)		Φ2.0mm	Φ2.4mm	Gas (l/min)
Current (A)	Flat position welding	250-400	300-500	15-25
Current (A)	Horizontal fillet welding	250-350	300-450	15-25