E91T1-B3C Low Alloy Steel Flux Cored Wire

Send Message Request a Quote

The E91T1-B3C low alloy steel flux cored wire belongs to basic type slag system. Being a low hydrogen welding wire, this product is endowed with premium resistance against heat and oxidation. Moreover, this type of pipeline flux cored wire offers weldability and mechanical properties in welding of heat resistant steel such as 2.5Cr-1Mo.

In addition, this low alloy steel flux cored wire is highly recognized by stable arc, low spatter and excellent formation. Furthermore, 300℃ preheat is required. Therefore, our CO2 gas shielded wire is extensively applied to high-pressure high-temperature pipeline, chemical machinery and petroleum cracking equipment at temperature lower than 550℃.

Standards
GB/T17493-2008 E621T1-B3C
AWS A5.29 E91T1-B3C

Chemical composition of deposited metal (%)

	C	Mn	Si	Cr	Mo	S	P
Standard	0.05-0.12	≤1.25	≤0.80	2.00-2.50	0.90-1.20	≤0.03	≤0.03
Typical	0.07	0.60	0.15	2.08	0.93	0.017	0.012

Mechanical properties of deposited metal(690℃ × 1h)

	Rm (MPa)	Rp0.2 (MPa)	A5 (%)
Standard	620-760	≥540	≥17
Typical	680	595	22

Recommended welding data (DC , shielding gas: CO2)

Wire diameter (mm)	Current (A)	Voltage (V)	Gas (l/min)
Φ1.2	200-260	24-30	15-20
Φ1.6	220-300	24-32	15-20