#50W Thrust Washers

Send Message Request a Quote

#50W

1. The #50W thrust washer made by our company is a kind of high-performance, solid-lubricated product that is mainly constructed from copper alloy. Different from common bearings, the solid-lubricated thrust washer does not depend on oil film for lubrication.

2. This product allows solid lubricant to rub against axle through frictional heat when in use. It gives outstanding lubrication performance when oil and powder coexist. The thrust washers can not only protect axle from abrasion, but also make the characteristic of solid lubricant permanent.

3. Thus far, the thrust washers have been widely used as the plastic mould accessories, packaging machine accessories, and the other transmission accessories.

4. Please choose the part number through the appropriate inner diameter and thickness. Here is an example under conditions of 6mm inner diameter and 3mm thickness.

Technical Parameters

Part No.	Inner Diameter	Outer Diameter	Thickness	Screw Holes
Part No.	Inner Diameter	Outer Diameter	Thickness	P.C.D	Number of Holes	Flat Head Screw	d1
#50W-0603	6.2	25	3	15	2	M3	3.5
#50W-0803	8.2	28	"	18	"	"	"
#50W-1003	10.2	30	"	20	"	"	"
#50W-1203	12.2	40	"	28	"	"	"
#50W-1203N	12.2	40	"	Without flat head screw hole			3.5
#50W-1303	13.2	40	"	28	2	M3	"
#50W-1403	14.2	40	"		"	"	"
#50W-1503	15.2	50	"	35	"	"	"
#50W-1603	16.2	50	"		"	"	"
#50W-1603N	16.2	50	"	Without flat head screw hole
#50W-1803	18.2	50	"	35	2	M3	3.5
#50W-2005	20.2	50	"		"	M5	6
#50W-2505	25.2	55	5	40	"	"	"
#50W-3005	30.2	60	"	45	"	"	"
#50W-3505	35.2	70	"	50	"	"	"
#50W-4007	40.2	80	7	60	"	M6	7
#50W-4507	45.2	90	"	67.5	"	"	"
#50W-5008	50.3	100	8	75	4	"	"
#50W-5508	55.3	110	"	85	"	"	"
#50W-6008	60.3	120	"	90	"	M8	9
#50W-6508	65.3	125	"	95	"	"	"
#50W-7010	70.3	130	10	100	"	"	"
#50W-7510	75.3	140	"	110	"	"	"
#50W-8010	80.3	150	"	120	"	"	"
#50W-9010	90.5	170	"	140	"	M10	11
#50W-10010	100.5	190	"	160	"	"	"
#50W-12010	120.5	200	"	175	"	"	"