Technical parameter
Model | CZ6280A | CZ62100A | CZ62120A |
Capacity | |||
Max. swing over bed | 800mm | 1000mm | 1200mm |
Max. swing over cross slide | 505mm | 705mm | 800mm |
Center distance | 2m, 3m, 4m, 5m, 6m, 8m, 10m, 12m | ||
Max. swing over gap | 1000mm | ||
Valid length of gap | 300mm | ||
Bed width | 500mm | ||
Headstock | |||
Spindle bore diameter | 105mm | ||
Spindle nose | C-11 or D-11 | ||
Spindle tapered hole | 1:16 or 1:20 | ||
Spindle speeds (step) | 14-750rpm (18 steps) | ||
Gearbox-threads and feeds | |||
Threads range (kinds) | 1-240mm (54 kinds) | ||
Threads range (kinds) | 28-1 inch (37 kinds) | ||
Moudle threads range (kinds) | 0.5-60 DP (45 kinds) | ||
Pitch thread range (kinds) | 30-1 TPI (27 kinds) | ||
Longitudinal feed range (kinds) | .05-1.42mm/r (72 kinds) | ||
Transverse feed range (kinds) | .015-0.48mm/r(72 kinds) | ||
Rapid feed: Longitudinal/Transverse | 6/2m/min | ||
Leadscrew size: Diameter/Pitch | T48mm/12mm | ||
Carriage | |||
Cross slide travel | 400mm | ||
Tool rest travel | 230mm | ||
Size of tool shank | 32*32mm | ||
Tailstock | |||
Sleeve diameter | 100mm or 120mm | ||
Sleeve taper | Morse #5 or #6 | ||
Spindle travel | 205mm | ||
Motor | |||
Main driving motor | 11KW | ||
Cooling pump motor | 0.09KW | ||
Rapid feed motor | 0.12KW OR 0.18KW |