15mm PM Stepper Motor with POM Gearbox

Product Code: 15mm

Features
The 15mm PM stepper motor uses permanent magnet rotors which are commanded to move or hold by electrical pulses. The motors are constructed with the housing of 15mm in diameter.

Before the installation of any of gearboxes, the step angle was set at 18° and the motor itself rotates with a maximum holding torque of 40g.cm. From the above picture, you see that our PM stepper motor has been assembled with a POM planetary gearbox with a gear ratio of 1:50.

Due to the limited space inside the motor, a PCB is put outside the motor and welded with the out leads. Around the PCB, a black cover made from PBT is especially used to prevent any dusts and ensure the PM stepper motor can operate properly in a good working condition for a longer term.

Applications
Typical applications of the stepper motor are in the fax, paper cutter, scanner, copy machine, IP camera, and healthcare products.