QY4ST(A) Single Cylinder 2 Post Lift with Base Plate

Description of Single Cylinder 2 Post Lift with Base Plate

The QY4ST(A) 2 post lift possesses a heavy-duty hydraulic cylinder. It is designed with a reinforced base-plate that acts as a powerful support for posts. The overall height of 2760mm allows this lift to be installed in almost any professional or residential garage with low ceilings.

The 2 post lift is equipped with a dual point lock release system.

Features of Single Cylinder 2 Post Lift with Base Plate
1. Driving Mode
Chain driving mode

2. Lock Release Mode
Dual point lock release system

3. Arm Assembly
1) Standard offset (asymmetric) arm design
When the QY4ST(A) single cylinder 2 post lift is raising a vehicle, its front arms are near the front wheels of the vehicle and the rear arms are close to rear wheels. Since the front arm is shorter than the rear arm, the vehicle’s center of gravity will be moved towards the center of posts, which helps to improve safety.

2) Combination of Drop-In and Screw Lifting Pads
A drop-in lifting pad contains sleeves of different heights. The operator can change the sleeve according to the height of a vehicle chassis. The pad comes with labor saving and easy operation. However, it sometimes fails to touch the chassis.
A screw lifting pad owns a screw inserted into a loading arm. The operator may turn the screw to adjust the pad height in line with the chassis height of a vehicle. The pad is capable of touching the chassis through laborious adjustment.
Different from many like products only fitted with drop-in lifting pads or screw lifting pads, our 2 post lift employs the combination of drop-in and screw lifting pads, namely, the screw lifting pad with a 70mm-high sleeve. The operator can insert the sleeve into a loading arm, put the screw pad into the sleeve, and then turn the screw in order to make the pad touch the chassis.

4. Safety Mechanism
1) Automatic arm lock restraints
2) Door guard protection rubber
3) An up-limit switch is used to guarantee the working stroke of cylinders in a safe length scope.
4) Owing to its heavy-duty leaf chains with 8 tablets and the 62mm-diameter chain pulley, the 2-post auto lift is able to lift cars smoothly and strongly.
5) As a powerful support of posts, the base plate shares a part of force on the posts, and enhances the ruggedness of this two-post car lift.
6) The 2 post lift makes use of ultra-high molecular nylon sliding blocks supporting self lubrication, so as to ensure smooth lifting and lowering.
7) Overload safety valve
8) Safety valve avoiding a sudden loss of pressure
9) Involving anchor bolts

5. Control System
1) Push an “UP” button on the motor for lifting.
2) Push a “DOWN” lever on the pump for descending.