CLY5250GJY Liquid Tanker Truck (15-25m3)

Send Message Request a Quote

CLY5250GJY

Aside from a 230-hp engine, DFL1250A8 chassis with wheelbase of 4350 1350mm is also mounted to CLY5250GJY liquid tanker truck. The engine is in conformity with Euro III emission standard. Other options such as engines with 230-270 horse power are offered for you to choose.

The liquid tanker truck adopts the cab which is jointly developed by Donfeng Motor and NISSAN MOTOR Co., Ltd. Inside the fully equipped cab, the steering wheel is forward and backward or up and down adjusted. Power sunroof and foot rest are set to relieve the long-time driving caused fatigue. Tank of this tank truck comes with standard volume of 21m3 and optional tank volume of 15 to 25m3. It is commonly produced from carbon steel. In accordance with clients' requirements, it can be made of stainless steel or aluminum alloy. The fluid tanker truck is used to haul oil products or many other chemical liquids.

CLY5250GJY Liquid Tanker Truck (15-25m3)

Parameters of Liquid Tanker Truck

Overall Dimension Parameters	Total length (mm)	9560	Mass Parameters	Max. total mass (Kg)	25000
	Total width (mm)	2495		Rated load mass (kg)	12500
	Total height(mm)	3200		Kerb mass (Kg)	12305
	Wheel base (mm)	4350 13504350 1300
Performance Parameters	Chassis manufacturer	DongfengMotors	Max. gradability(%)		≥28
	Chassis type	DFL1250A8	Braking gradability (%)		≥20
	Max. speed (km/h)	90	Min. ground clearance (mm)		250
			Min. turning diameter (m)		18.5
Chassis Configuration	Item	Standard configuration			Optional
	Engine	L6, turbo-charge with intercooler, electrically controlled common rail. type: ISDe230 30(Euro Ⅲ) , Rated power: 169Kw (230Ps)			ISDe245 30 (245ps), ISDe270 30 (270ps), C230 33 (230ps), C245 33 (245ps), C260 33 (260ps)
	Cultch	Single disc, dry type diaphragm spring clutch, φ430mm
	Transmission	FAST 8 speeds of gear boxes
	Rear axle	10T double rear axle; main reduction ratio: 4.44			5.571
	Front axle	7T, fist type I shaped structure
	Body frame	Rivet & composite joint structure
	Suspension system	Front spring have 8 disks, lifting hook structure, bilateral shock absorber; Rear spring have 9disks.
	Steering system	Power steering, integral power steer machine
	Braking system	Service brake: dual circuit , hanging tandem brake, drum brakeParking brake: handle valve control spring brake chamber, act on middle and rear wheelAuxiliary brake: butterfly valve electric-gas control, engine emission braking system
	Tyre	Common tyre, amount:10, type: 11.00R20			10.00-20, 10.00R20, 11.00-20
	Electrical system	Battery 12V 165A·h(two)/generator 28V70A/starter 24V, 7.8Kw
	Air conditioner	A/C in cab
	Cab	Low roof cab with flat-head, single sleeper and single row.
Tank Parameter	Item	Standard			Optional
	Tank volume (m3)	21.5			15~25 m3
	Overall dimension of tank(mm)	6880×2496×1560
	Tank material	Carbon steel Q235
	Discharge ball valve	Aluminum alloy DN80			Stainless steel DN80, DN100
	Bottom valve	None			Stainless steel or aluminum alloy DN100
	Tank mouth	Amount: 2; material: carbon steel, diameter: Φ500
	Discharge rubber hose	Amount: 2, length: 6.5m, ball valve accords with drift diameter
	Oil pump	80YHCB-60 circular-arc cogwheel pump

Scan QR to Read
Links：https://www.globefindpro.com/products/77897.html