Through the buttons on the panel and the LCD display, the CR-WiFi6201 wireless conference system control unit achieves centralized control over all conference functions. It supports conference mode selection, including speaker number selection and speaking mode selection. High-fidelity audio effect is obtained due to the DSP technology, noise suppression technique, and built-in equalizer. In addition, our wireless conference system host is provided with automatic camera tracking and control functions. It will automatically track and shoot the whole conference.
Features
1. Our wireless conference system control unit supports WPA/WPA2 standards, ensuring conference security and avoiding eavesdropping and malicious interference.
2. A group of microphone mixer output is provided. With a recording device, on-site conference recording is realized.
3. Our wireless conference system central controller supports automatic camera tracking and several control protocols, including VISCA, CREATOR, and PELCO-P/D.
4. This central control equipment is designed with a full metal housing. With the connection of the housing and circuit with the ground strengthened, our product is able to resist 8kV contact discharge and 15kV air discharge.
Model | CR-WiFi6201 |
Network interface | RJ45 port |
Display | 1602 LCD display |
Control interface | DB9 female connector |
Signal to noise ratio (S/N) | >80dB |
Harmonic distortion | <0.5% |
Carrier distortion | <1% |
Crosstalk attenuation (1KHz) | >50dB |
Static power consumption | 3W |
Max. power consumption | 70W |
Dynamic range | >80dB |
Frequency response | 20Hz~20KHz |
Communication distance between host and AP | <100m |
Dimensions | 483L×267W×44H (mm) |
Power supply (Americas, Japan) | AC100V~AC120V 60Hz |
Power supply (Eurasia) | AC200V~AC240V 50Hz |