SC-PIP202 Scaler Switcher

Send Message Request a Quote

Designed for signal switching and high-resolution image display, the SC-PIP202 scaler switcher is a high-performance audio and video seamless switcher. It supports DVI output, upscaling, picture in picture, and 12 kinds of screen switching effects. The LCD screen and light-emitting operation buttons makes it easy for users to operate this scaler switcher.

Technical Parameters

Model	SC-PIP202
Video
Gain	0 dB
Bandwidth	Composite video (CVBS), S-Video: 150MHzYPbPr/YCbCr: 350MHzVGA video: 380 MHzDVI video: 2.25Gbps
Differential phase I/OS	<1.28°, 3.58 MHz
Differential phase error	0.1%, 3.58-4.43 MHz
Differential gain error	0.1%, 3.58-4.43 MHz
Switching speed	100ns (maximum duration)
Signal type	VGA, S-Video, COMP component video (YPbPr/YCbCr), composite video (CVBS), DVI
Video Input
Interface	CV: 1 RCA female connectorS-Video: S-Video terminal (Y-C terminal)VGA: DB15 female connectorCOMP: 3 RCA female connectorsDVI: DVI-D
Signal intensity	1Vpp: Y component video, S-Video, composite video0.7Vpp: VGA (computer signal)0.3Vpp: component video, S-Video C component /-0.4Vpp: HDMI/DVI video
Minimum / maximum level	Analog signal: -2.0Vpp/ 2.0Vpp
Impedance	75 Ω
Return loss	<-30dB@5MHz
Horizontal frequency response	60-200KHz
Vertical frequency response	10Hz-200Hz
VGA Video Output
Interface	DVI-I connector
Minimum / maximum level	-2.0Vpp / 2.0Vpp
Impedance	75 Ω
Return loss	<-40dB@5MHz
DC offset	Max. ±5mV
VGA Synchronization Signal
Input / output signal type	RGBHV, RGBS, RGsB, RsGsBs, composite video, component video
Input Level	0.5V - 5.0Vpp, 4.0Vpp normally
Output Level	AGC-TTL: 5Vpp, unterminated
Input impedance	510 Ω
Output impedance	75 Ω
Maximum transmission delay	Horizontal: 90nsVertical: 160ns
Maximum rise / fall time	4ns
Polarity	Positive or negative (fully consistent with the input)
Audio Signal
Input / output interface	8 10pin Phoenix connectors, unbalanced audio input per channel1 RCA connector for unbalanced output
Gain	0 dB
Frequency response	20Hz ~ 20kHz
Total harmonic distortion noise	0.05% @ 1 kHz, at rated voltage
SNR	>58dB
Stereo separation level	>80dB @ 1 kHz
Common mode rejection ratio (CMRR)	>75dB @: 20 Hz ~ 20 kHz
Signal type	Stereo (unbalanced connection)
Impedance	Input: >10 kΩ (balanced or unbalanced connection method)Output: 50 Ω (unbalanced connection), 100 Ω (balanced connection)
Maximum input level	19.5dBu, balanced or unbalanced connection method
Gain error	±0.1dB @20 Hz ~ 20 kHz
Maximum output level	19.5dBu, balanced or unbalanced connection method
MIC
MIC type	Moving coil induction
Input sensitivity	25mV
Frequency response	50Hz-16K Hz
Connector type	Mono input
Control Function
Serial control interface	RS-232, 9-pin D-type female connector
Baud rate and protocol	Baud rate: 9600, date bit: 8 bits, stop bit: 1, no parity bit
Serial control port structure	2 = TX, 3 = RX, 5 = GND
Specification
Power supply	100VAC-240VAC ～50/60 Hz, international adaptive power
Max. power consumption	100W
Temperature	Storage and operating temperature: -20 ℃ ~ 70 ℃
Humidity	Storage and operating humidity: 10% - 90%
Dimensions (mm)	483(L) × 290(W) × 43.6(H)
Weight	About 1.9kg
Warranty	1 year free warranty and lifetime maintenance

Related Names
Digital Video Scaler with PIP | Seamless Switcher | Video Scaler with DVI Output

Scan QR to Read
Links：https://www.globefindpro.com/products/78723.html