MAX-1301HD-B Scaler Switcher

Send Message Request a Quote

The MAX-1301HD-B scaler switcher is a matrix switch that integrates video signal format conversion and switching. It is able to convert and switch many types of video signals, including composite video signal (CV), component video signal (Pr/Cr, Pb/Cb, Y), S-Video signal (Y/C), VGA signal, and HDMI signal, to unified VGA or HDMI/DVI signals. In addition, our scaler switcher supports microphone signal input.

Technical Parameters

Model	MAX-1301HD-B
Video
Gain	0 dB
Bandwidth	AV: 150MHzS-Video: 150MHzVGA: 375 MHzHDMI/DVI video: 2.25Gbps
Crosstalk of multiple input channels to one channel	-50dB@50MHz, -45dB@10MHz
Differential phase I/OS	<1.28°, 3.58 MHz
Differential phase error	0.1%, 3.58-4.43 MHz
Differential gain error	0.1%, 3.58-4.43 MHz
Switching speed	100ns (maximum duration)
Signal type	VGA, S-video, component video (YPbPr/YCbCr),composite video (CVBS), HDMI/DVI
Video Input
Interface	CV: 1 RCA female connectorS-Video: S-Video terminal (Y-C terminal)VGA: DB15 female connector COMP:3 RCA female connectors HDMI/DVI: HDMI-A connector (Type A connector)
Signal intensity	1Vpp: Y component video, S-Video, composite video0.7Vpp: VGA (computer signal)0.3Vpp: component video, S-Video C component /-0.4Vpp: HDMI/DVI video
Minimum / maximum level, analog signals	-2.0Vpp/ 2.0Vpp
Impedance	75 Ω
Return loss	<-30dB@5MHz
Horizontal frequency response	60-200KHz
Vertical frequency response	10Hz-200Hz
VGA Video Output
Interface	DB15 female connector
Minimum / maximum level	-2.0Vpp/ 2.0Vpp
Impedance	75 Ω
Return loss	<-40dB@5MHz
DC offset	Max.: ±5mV
VGA Synchronization Signal
Input / output signal type	RGBHV, RGBS, RGsB, RsGsBs, composite video, component video
Input Level	0.5V - 5.0Vpp, 4.0Vpp normally
Output Level	AGC-TTL: 5Vpp, unterminated
Input impedance	510 Ω
Output impedance	75 Ω
Maximum transmission delay	Horizontal: 90nsVertical: 160ns
Maximum rise / fall time	4ns
Polarity	Positive or negative (fully consistent with the input)
HDMI Video Input
Interface	HDMI-A connector (Type A connector )
Protocol supported	HDMI1.3a, DVI1.0, HDCP1.3
Gain	0dB
Pixel bandwidth	165MHz, full digital
Interface bandwidth	2.25Gbps, full digital(a total of 6.75Gbps, 2.25Gbps per color)
Maximum resolution supported	HDPC 1600×1200@60_24bit color depth HDTV 1920×1080P@60_24bit color depth
Bit clock jitter	<0.15 Tbit
Rise time	<0.3Tbit (20%-80%)
Fall time	<0.3Tbit (20%-80%)
Signal type	HDMI / DVI-D fully digital T.M.D.S. signal defined in HDMI 1.3a / DVI 1.0 standard
Signal intensity	T.M.D.S. /- 0.4Vpp
Minimum/maximum level	T.M.D.S. 2.9V/3.3V
Impedance	50 Ω
Input EDID	Use default EDID, support terminal EDID mapping to the input terminal
Maximum DC offset error	15mV
Recommended maximum input distance	<25m, at 1920×1080p@60Hz, recommended to use certified HDMI dedicated wire, such as Molex TM wire
HDMI Video Output
Interface	HDMI-A connector (Type A connector )
Minimum / maximum level	T.M.D.S. 2.9V/3.3V
Impedance	50 Ω
Recommended maximum output distance	<10m, at 1920×1080p@60Hz, recommended to use certified HDMI dedicated wire, such as Molex TM wire
Audio Signal
Input / output interface	4 10-pin Phoenix connectors, unbalanced audio input per channel1 RCA connector for unbalanced output
Gain	0dB
Frequency response	20 Hz ~ 20 kHz
Total harmonic distortion noise	0.05% @ 1 kHz (at rated voltage)
SNR	>58dB
Stereo separation level	>80dB @ 1kHz
Common mode rejection ratio (CMRR)	>75dB @: 20 Hz ~ 20 kHz
Signal type	Stereo (unbalanced connection)
Impedance	Input: >10 kΩ (balanced or unbalanced connection method)Output: 50 Ω (unbalanced connection), 100 Ω (balanced connection)
Maximum input level	19.5dBu, balanced or unbalanced connection method
Gain error	±0.1dB @20 Hz ~ 20 kHz
Maximum output level	19.5dBu, balanced or unbalanced connection method
MIC
MIC type	Moving coil induction
Input sensitivity	25mV
Frequency response	50Hz-16KHz
Connector type	Mono input
Control Function
Serial control interface	RS-232, 9-pin D-type female connector
Baud rate and protocol	Baud rate: 9600, date bit: 8 bits, stop bit: 1, no parity bit
Serial control port structure	2 = TX, 3 = RX, 5 = GND
Specification
Power supply	100VAC-240VAC, 50/60 Hz, international adaptive power
Max. power consumption	100W
Temperature	Storage and operating temperature: -20 ℃ ~ 70 ℃
Humidity	Storage and operating humidity: 10% - 90%
Dimensions (mm)	483(L) × 290(W) × 43.6(H)
Weight	About 1.9kg
Mean time between failures	30,000 hours
Warranty	1 year free warranty and lifetime maintenance

Related Names
Video Scaler | Video Scaler Switcher | Video Switch

Scan QR to Read
Links：https://www.globefindpro.com/products/78745.html