T8 LED Tube

Send Message Request a Quote

Our T8 LED tube is an ideal substitute for fluorescent light tubes. It consumes 50% less of energy than fluorescent lights while providing the same brightness. The aluminum heat dissipation system and low-voltage constant-current drive circuit improve the safety and prolong the lifespan of the product. The product is widely used in office buildings and supermarkets. It has been successfully used in the subway system in Hangzhou to produce satisfying illumination effect.

Product Advantages

1. Green Product, High Energy Efficiency
The light tube is green and has high energy efficiency. The 8W or 16W T8 LED tube performs the same as the 18W or 36W fluorescent light. The product saves more than 50% of energy compared with fluorescent lights. It does not contain mercury. It is driven by DC so it does not have stroboflash.

2. Long Lifespan, Good Quality
The lifespan of the product is as long as 25000 hours. It does not require frequent maintenance or replacement, hence can reduce cost. After being used for 25000 hours, the luminous flux can still be more than 70% of its original value.

3. Easy Installation
The installation is quite convenient. The product has the standard G13 joint. After removing the ballast in an old circuit, you can directly use the T8 LED tube to substitute the old fluorescent light. You do not need to change the existing light holder.

4. Good Heat Dissipation
The adopted aluminum dissipation system brings excellent heat dissipation.

5. High Luminous Efficiency

6. High Color Rendition Index
Its high color rendering index reproduces colors faithfully, creating comfortable illumination effect.

7. Multiple Choices for Color Temperature
The color temperature of the T8 LED tube ranges from 3000K to 5700K, satisfying needs in different places.

Product Specification

Product Name	Product Type	Color Temperature	Wattage	Luminous Flux	Light Angle	Input Voltage	Ra	Product Size
LED T8 Tube Model 01	LED-T801-008-30-W	3000k	8w	850lm	270°	24vDC	80	600mm
	LED-T801-008-50-W	5000k	8w	850lm	270°	24vDC	80	600mm
	LED-T801-008-57-W	5700k	8w	850lm	270°	24vDC	80	600mm
	LED-T801-016-30-W	3000k	16w	1600lm	270°	24vDC	80	1200mm
	LED-T801-016-50-W	5000k	16w	1700lm	270°	24vDC	80	1200mm
	LED-T801-016-57-W	5700k	16w	1700lm	270°	24vDC	80	1200mm
LED T8 Tube Model 02	LED-T802-009-30-W-WQ	3000k	9w	800lm	270°	220vAC	80	600mm
	LED-T802-009-50-W-WQ	5000k	9w	850lm	270°	220vAC	80	600mm
	LED-T802-009-57-W-WQ	5700k	9w	850lm	270°	220vAC	80	600mm
	LED-T802-018-30-W-WQ	3000k	18w	1600lm	270°	220vAC	80	1200mm
	LED-T802-018-50-W-WQ	5000k	18w	1700lm	270°	220vAC	80	1200mm
	LED-T802-018-57-W-WQ	5700k	18w	1700lm	270°	220vAC	80	1200mm
LED T8 Tube Model 04	LED-T804-009-30-W	3000k	9w	800lm	180°	220vAC	80	600mm
	LED-T804-009-50-W	5000k	9w	850lm	180°	220vAC	80	600mm
	LED-T804-009-57-W	5700k	9w	850lm	180°	220vAC	80	600mm
	LED-T804-018-30-W	3000k	18w	1600lm	180°	220vAC	80	1200mm
	LED-T804-018-50-W	5000k	18w	1700lm	180°	220vAC	80	1200mm
	LED-T804-018-57-W	5700k	18w	1700lm	180°	220vAC	80	1200mm
	LED-T804-024-57-W	5700k	24w	2300lm	180°	220vAC	80	1200mm

Production Process


1. preparing raw materials 2. spurting code 3. brushing solder paste 4. surface mounting process 5. reflow soldering	6. igniting light emitting chips for test 7. repairing 8. quality control 9. sending light tubes to warehouses after they pass the tests

1. clearing the aluminum holder 2. mounting elements to the printed circuit board3. spraying the silicon grease4. adding substrates5. preparing materials6. fastening screws7. soldering pins and caps8. high current test for semi-finished products9. repairing	10. installing the T8 light mask and clearing dust11. installing end caps12. igniting finished lights for test13. repairing14. aging test for finished products15. repairing16. packaging17. quality control18. sending light tubes to warehouses after they pass the tests

Quality control measures

1. In the SMT process, we check whether there is false welding, whether the position of welded elements is too high, whether LED lights fail to be ignited or the light is dim through visual observation.

2. In the assembly process, we conduct high-current test on semi-finished products.

3. We perform aging test at low voltage, high voltage, and high temperature. The aging test examines the reliability of contact points, the ability of bearing low or high voltage, heat resistance, conductivity, and electric insulation.

Related Names
LED Light Tube | Under Cabinet LED Tube | Interior LED Light

Scan QR to Read
Links：https://www.globefindpro.com/products/80653.html