MFZ11–YC Hydraulic Solenoids for Wet-Pin DC Solenoid Valves

Send Message Request a Quote

The MFZ11-YC hydraulic solenoids are particular designed for wet-pin DC solenoid valves. The product is applicable for the control circuit equipped with single-phase bridge type full-wave rectified power supply. The voltage for the product shall be no more than 220V. The reasonable fluctuation range of the voltage for the product is from 85% to 110%. When placing the order, customers shall inform us if they have any special requirements. This product can be provided with DIN plug, junction box, waterproof plug or half-wave rectified plug. We fill the space between the enclosure and the coil with plastic material. So the product has good heat insulation. This newly developed technology confirms to the IP 69 standard.

MFZ11–YC Hydraulic Solenoids for Wet-Pin DC Solenoid Valves

Applications
The hydraulic solenoid can be used on German Rexroth screw joint magnetic reversing valve with the drift diameters of 6mm and 10mm. If customer purchases the product for the applications on the devices other than the valves of Rexroth series, we may adjust the size of the part to connect the product and the valve body, extension length of the push rod and the working supply voltage without affecting the performance the product.

Model: MFZ 11 -37YC
Rated Attraction Force [N] : ≥ 37
Rated Stroke[mm] : 2.8
Total Stroke[mm] : ≥ 6
Supported Oil Pressure[MPa] : 21
Power Consumption[W] : ≤ 30
Operation Frequency [t/h] : 12000
Duty Circle[%] : 100
Rated Voltage [V] : 12 ,24 ,110 ,220