Ballast Compatible T8 LED Tube

As people's salary goes higher, you have to pay much more money to an electrician after he finishes the wire connection work caused by the replacement of a light tube. If some kind of LED light can substitute old fluorescent lights but does not require alteration of the old wire connection, wouldn't that save some money for you?

The ballast compatible T8 LED tube is just such a product. It is developed by our technical taskforce consisting of specialists owning doctor's degree, outstanding LED designers from Japan and Germany, as well as other industrial experts after years of research and experiment. It adopts high quality power supply circuit, imported chips and core components, and is compatible with all magnetic ballasts and most electronic ballasts. In other words, you can directly use it to replace old fluorescent lights without making any adjustments on the existing wire connection.

At the same time, it works with stable working current and runs without stroboflash. Such an exquisite light can only be manufactured by few companies owning great strength, and we are proud to be one of them.

Application
The LED tube can replace old T8 fluorescent lamps in residential and business buildings, workshops, hospitals, schools, parking lots, airports, bus stations, tunnels, supermarkets, as well as automatic vendor machines.

Features
1. Two Kinds of Bulkhead
The LED tube is equipped with wave-shaped bulkhead plug and normal bulkhead plug, from which you can choose based on your needs.
2. High Luminous Efficiency
The product has a high luminous efficiency of 105LM/W, which enables it to use 70% less of energy than common daylight lamps.
3. Long Lifespan
The 3528 LED lamps adopt 9*26 mil or 10*23 mil chips, and have good heat dissipation as well as a lifespan of over 50,000 hours. Special encapsulation technology makes the product sturdy and durable, enables it a lifespan of 40,000 hours.
4. High Power Factor
Its power factor is above 0.95.
5. Compatibility with Ballasts
The LED tube is compatible with all magnetic ballasts with lamp starters, as well as most electronic ballasts. So, you do not need to adjust the existing wire connection or change the light bracket when replacing an old fluorescent light, the installation is convenient and economical.
6. Independent Power Supply Circuit
Its internal power supply is safely partitioned from other circuits.
7. Quick Startup
It has a quick startup, is able to reach the maximum luminous flux immediately after being ignited.
8. Healthy and Green Light
It is without stroboflash or unacceptable glare. It is environmental friendly as it emits no UV, infrared, or thermal radiation, and does not contain mercury.
9. Light Rays in Uniform Direction
It generates light in uniform direction, so the light is easy to control and the efficiency is enhanced.
10. High Color Rendering Index
It has a high color rendering index so that it can give you a clear and real vision. The color temperature of its light is adjustable.
11. High Stability
It is protected by a constant-current circuit and thermal protection system, so will not be influenced by unstable voltage.
12. Good Quality
The product has won the CE, ROHS, PSE, and FCC certifications, and is warranted for 3 to 5 years.
13. Wide Temperature Range
Its working temperature is -25℃-45℃, giving the product strong ability of adapting to temperature changes.
14. Customization
The LED tube can be manufactured based on you special requests.

Installation
The LED tube has 4 wires inside connected to the 4 pins at the two ends of the light tube. If the light is used together with an electronic ballast, the 4 pins are all necessary for powering the light. If it is directly connected to AC power, connecting any two pins to the power supply can ignite the light.

Note
1. Ensure that the electricity has been cut off before the installation.
2. Keep the device away from water and be careful of electricity.
3. Ensure that the voltage is in the range of the working voltage.
4. You must remove the compensation capacitor before using the LED tube.
5. Read the instruction book carefully before installation.

The box is made of 7 layers of corrugated paper. Each box can store 25 pieces of the LED tube.

Related Names
LED T8 Retrofit Tube | LED High Bay Lighting | Electronic Ballast Light Fixture