T5 LED Tube with Mounting Bracket

The T5 LED tube with mounting bracket is safe and is easy to install. You can conveniently fix it with a clip and do not need to buy an extra bracket. At the same time, you can conveniently connect multiple light tubes in series.

Application
The LED tube is widely used at home, in office, workshop, hospital, and school as a substitute for traditional T5 fluorescent lights that use calcium halo phosphate or trichromatic phosphors.

Features
1. High Light Efficiency
With a light efficiency as high as 100LM/W, the LED tube saves more than 65% of energy compared with normal daylight lamp.
2. Long Lifespan
The 3528 LED with a chip size of 10*23 mil has a lifespan of over 50,000 hours. The light tube is sturdy and durable after being encapsulated with special technologies and can be used for 30,000 hours.
3. High Power Factor
The power factor is higher than 0.95.
4. Easy Installation
The light tube is easy to install, does not require an extra bracket, and can be connected in series.
5. High Energy Efficiency
It has a high energy efficiency, using 80% less of energy than daylight lamp, and 50% less than fluorescent light.
6. Green Light
It is green as it does not emit UV, infrared, or thermal radiation, and does not contain mercury either.
7. High Illuminance
It adopts a premium light mask which gives out soft light with high light extraction efficiency, such that the illuminance is undoubtedly higher than fluorescent light.
8. High Color Rendering Index
It has a high color rendering index so that colors of objects can be reproduced faithfully and clearly. It also supports adjusting the color temperature.
9. Quick Response
It responses quickly and is able to immediately reach the highest luminous flux upon being turned on. It has no stroboflash and has very limited glare.
10. High Stability
The built-in thermal protection system as well as the constant-current circuit protect the product from being overheated for influenced by voltage fluctuation, enabling the product to work stably and efficiently.
11. Reliable Quality
The product is certified by CE, ROHS, PSE, and FCC, and is warranted for 3 to 5 years.

Specification
1. Working temperature, -25℃-45℃
2. Working voltage, AC90-264V
3. LED lamp, 3528SMD
The LED tube can be designed and manufactured according to your requirements.

Installation
Installing a single LED tube
1. Fix clips to the destination position with screws and then fix the bracket to the clips.
2. Connect the lead-out wires of the light to the power source and plug the other end with a bulkhead plug.
3. Align the pins at the two ends of the light tube with the slots on the bracket with the pins perpendicular to the bracket, move the light tube to the bracket along the slots until it is in the right position. Then, rotate the light tube to make the mask face toward the floor.

Installing multiple light tubes
When installing multiple light tubes, you must connect adjacent light tubes with connectors and plug a bulkhead plug to the last light tube.

Note
1. Ensure that the electric power has been cut off before you begin the installation.
2. Keep the devices from water and be careful with electricity.
3. Ensure that the electric supply is within the range of the working voltage.
4. Read the instruction book carefully before the installation.

Sketchmatic diagram for package
The LED tube is wrapped with two layers of bubble bag before being put into a cardboard tube, which is made of 3 layers of corrugated paper.

Related Names
LED T5 Light Tube | Home LED Light | LED Lighting Fixture