Benefits
1. The 100W LED driver is designed to output a constant voltage at 24V.
2. High efficiency means little or no energy is lost from LED power supply system, thanks to the power factor correction.
3. This constant voltage LED driver will hold up under various weather or temperature conditions from -40℃ to 50℃.
4. Various protections are available against short circuit, over-current, over-load, and over-temperature.
5. Degree of Protection: IP67 rated
6. When you order LED driver from us, you are assured that you get the standard production, assembly, and maintenance service.
Model Number | VUF-100-024-FA2 | |
Output | DC Voltage | 24V |
Constant voltage | 24V | |
Rated Current | 0-4.15A | |
Ripple and Noise (Max.) | ≤300MVP-P | |
Line Regulation | ±2 percent | |
Load Regulation | ±3 percent | |
Setup Time | 8ms | |
Input | Voltage Range | 176-264Vac |
Frequency Range | 47-63Hz | |
Transfer Efficiency | 90% | |
Protection | Over-current | Protection type: output power limiting |
Under-current | According to the circuit type: Should be 'Hiccup mode current protection circuit or Zero-crossing circuit', input power limit ≤ 5W | |
Over-voltage | Protection type: Automatic clamp circuit | |
Over-temperature | Temperature control (85℃±5℃) | |
Environment | Automatic recovery below 65 degrees | |
Working Temperature | -30℃ - 50℃ | |
IP Rating | IP67 | |
Storage Temperature and Humidity | -40℃- 80℃ | |
Safety & EMC | Safety Standards | VL EN61347-1 EN61347-2-13 |
Tolerable Voltage | I/P-O/P:3.75KVAC, I/P-FG:1.88KVAC, O/P-FG:0.5KVAC (VL VDE standard) | |
Insulation Resistance | I/P-O/P:I/P-FG,O/P-FG:100MOhms/500VDC/25℃/70% Relative Humidity | |
EMI | EN55015 EN55022(CISPR22) Class B | |
Harmonic Current | EN61000-3-2Class C(≥50% load);EN61000-3-3 | |
Others | MTBF | ≥60000h (at the ambient temperature of 40℃) |
Dimension(mm) | L146×W70×H41 | |
Packing | 24pcs/carton, carton size:L470mm×340mm×175mm |