SC200/200 Construction Hoist

Send Message Request a Quote

SC200/200

Available with two cars, the SC200/200 construction hoist is able to carry 32 passengers at the same time. With the rated load of 4000 kg, this lifting equipment can also transport materials.

Technical Parameters

Item	Name	Parameters	Note
Cage	Cage	3.2×1.5×2.5m3.2×1.3×2.5m	Powder-spraying punched steel plateCage bottom: 4mm-thick plate
	Cabin of the building hoist	Seat, tool case, control panel	Plastic powder spraying
	Door	Perforated plate	Plastic powder spraying
	Gear	Tooth profile, module, material	The gear is tested by professional equipment.
Fence	Fence of construction hoist	Perforated plate (Plastic powder spraying)	The price of plastic-spraying perforated plate is twice that of the expanded plate mesh.
Driving device	Motor	Model: YZZ132M-4Power: 11kwElectric current: 24ARotating speed: 1390r/minProtection level: IP55Insulation class: FVoltage: 380V/50Hz	1. The housing of the motor of our construction lifting equipment is made of 104# aluminum conforming to the national standard thus is not easy to crack. 2. The worm gear of our construction hoist is made of 94# tin bronze and other parts are made of 38 # chrome bronze. 3. All these parts, except the bronze worm gear, are processed with heat treatment, blackening and nitriding. 4. Service life of the motor can be 10-15 years.
	Reducer gear box	1:16 speed ratio
	Mounting plate	High mounting precision	It works smoothly and steadily.
	Scaling ladder	Additional equipment installed on the driving system	Features: The scaling ladder makes the mounting of the construction hoist more convenient, flexible, and humanistic.
Mast section	Mast section	Q235 #20 seamless steel pipe	Surface treatment: Paint spraying (standard configuration), hot-dip galvanizing (optional configuration)
Mast section	Bolt	8.8 Grade M24	High strength
Rack	Rack	55# tyre steel	Service life of the rack of our passenger hoist: about 10 years
Electrical system	Electrical system	Main parts of the electrical parts are Siemens or Schneider products.	Features: a. The equipped fan has improved the heat dissipation performance of our construction hoist.b. The time delay relay makes our construction elevator work more smoothly and stably.c. The alarm bell rings when the fall arrest device stats to work.d. The failure warning light will shine when there is something wrong with the motor or the electrical system.
Safety device	Fall arrest device		This device can control the lowering of the cage at a safe speed to prevent the cage from falling accidentally.
	Load capacity limiter		1. The overload alarm buzzer will sound and the indicating light will blink when the load capacity is over high.2. This device is intelligent controlled and is easy to operate. 3. It will display the load of the construction hoist in real time.
	Limit switch
	Upper limit protection device	Prevent the suspended platform from dashing the mast top.
	Lower limit protection device	Prevent the suspended platform from crashing to the bottom.
	Door limit protection device
	Escaping-window limit protection device
	Caution warning device	Bell ringing
	Emergency stop protection device
	Buffering protection device	Springs
	Overload protection device for motor	This device will protect the electric motor when it runs abnormally
	Transformer short-circuit protection device
	Phase sequence protection device	Default phase and open-phase protection
Cable device	Cable	3×202 2×62
	Cable bucket	Standard configuration
	Cable trolley	Optional configuration
Tools	Mast section wrench	34-36	2
	Motor adjusting wrench	M17	1
	Rack wrench	M12	1
	Limit switch wrench	M14	1
	Fall arrest device wrench		1
	Pinion wrench		1
	Guide roller wrench		1
Optional	Frequency conversion system	CAN200	1. It can achieve floor selection. 2. The frequency conversion system allows the construction hoist to stop at the designated floor precisely. 3. This system helps protect the pinion and rack. 4. The speed can be set from low to high. 5. This system allows the builder hoist to start and stop at a constant speed with low noise. 6. Smooth transmission system guarantees high stability of the whole construction elevator.

How to Choose a Construction Hoist?
When purchasing the construction hoist, customers should always put security at the top of the list. Carefully check all safety devices, such as the fall arrest device, loading capacity limiter, limit switch, etc. In addition, customers should also take other aspects into consideration such as the company's production history, production scale, reputation and credibility, the capability to take a risk, as well as the efficiency of after-sales service.

Show Details

Scan QR to Read
Links：https://www.globefindpro.com/products/82944.html