FZQ800D-40T Luffing-jib Tower Crane (Large-scale construction)

Send Message Request a Quote

Technical Parameters

Performance Parameter Table for Stationary (Undercarriage/Embedded) Mode

Rated Lifting Torque (t. m)		800	Working Class (GB/T 3811-2008)		A4
Rated Lifting Capacity (t)	Hook	40	Lifting Speed (m/min)	Heavy Load 12~40t	0~21.5
	At Max. Radius	10.2		Light Load ≤12t	0~43
Working Radius (m)	Hook	7~50	Time to Complete One Full Luffing (min)		4.3
	At Special Condition	7~10	Slewing Speed (r/min)		0~0.3
	40t Rated Lifting Capacity	10~20	Slewing Angle (r/min)		Full Slewing
			Platform Tail Slewing Radius (m)		11.2
Max. Lifting Height (m)	4 Fall	~195	Hydraulic Jacking Speed (m/min)		0.4
	2 Fall	~390	One Jacking Stroke m		1.508~1.509
Max. Boom Hinged Point Height (m)		350	Max. Power (kW)		300
Dead Weight (t) Undercarriage (Four Layers of Anchorage Situation, Max. Boom Hinged Point Height of 150m, Inclusive of Ballast )					365
Dead Weight (t) Undercarriage (Four Layers of Anchorage Situation, Max. Boom Hinged Point Height 150m, Non-inclusive of Ballast )					300
Working Condition
Power Supply: Three-phase Five-Wire 380V 　 50Hz
Calculated Wind Pressure	Service Condition	250	Allowed Ambient Temperature	Lowest at Service Condition	-20
	Non-service Condition	1300		Lowest at Service Area	-40
	During Jacking Erection	100		Electrical Equipment Service Temp.	0~ 40
Allowed Service Humidity	1-80%	Allowed Service Altitude		Equal or Lower Than 20000m (If higher than 1000m, motor capacity shall be calibrated.)
Applicable Standards: GB/T 3811-2008 "Design rules for cranes", GB/T 13752-92 "Design rules for tower cranes" GB 6067-2006 "Safety rules for lifting appliances", JB 4315 "Cranes - Electric control device" GB 5144-2006 "Safety code for tower cranes"

Performance Parameter Table for Traveling Mode

Rated Lifting Torque 　 (t. m)		800		Working Class (GB/T 3811-2008)		A4
Rated Lifting Capacity	Hook	40		Lifting Speed (m/min)	Heavy Load (12~40t)	0~21.5
	At Max. Radius	10.2			Light Load (≤12t)	0~43
	at Special Condition	20		Traveling Speed (m/min)		0~12
Working Radius (m)	Hook	7~50		Time to Complete One Full Luffing (min) Full luffing time (min)		4.3
	At Special Condition	7~10		Slewing Speed (r/min)		0~0.3
	40t Rated Lifting Capacity	10~20		Slewing Angle (r/min)		Full Slewing
				Platform Tail Slewing Radius (m)		11.2
Lifting Height (m)	Hook MH	~100		Hydraulic Jacking Speed (m/min)		0.4
				One Jacking Stroke m		1.508~1.509
Max. Boom Hinged Point Height (m)		58.2		Max. Power (kW)		340
Dead Weight (t) (Free Standing Condition, Max. Boom Hinged Point Height of 58.2m,.)						280
Working Condition
Power Supply: Three-phase Five-Wire 380V 　 50Hz
Calculated Wind Pressure	Calculated Wind Pressure	Calculated Wind Pressure	Calculated Wind Pressure		Calculated Wind Pressure	Calculated Wind Pressure
Allowed Service Humidity	Allowed Service Humidity	Allowed Service Humidity			Allowed Service Humidity
Applicable Standards: GB/T 3811-2008 "Design rules for cranes", GB/T 13752-92 "Design rules for tower cranes" GB 6067-2006 "Safety rules for lifting appliances", JB 4315 "Cranes - Electric control device" GB 5144-2006 "Safety code for tower cranes"

Rated Lifting Capacity for MH at Different Radius of 4 Fall with the boom length of 50.36 meters

Radius (m)	7~10	10~20	22	24	26	28	30	32
Load (t)	20	40	35.5	31.7	28.6	25.8	23.5	21.4
Radius (m)	34	36	38	40	42	44	46	50
Load (t)	19.6	18	16.5	15.2	14	12.9	12	10.2

Rated Lifting Capacity for MH at Different Radius of 2 Fall with the boom length of 50.36 meters

Radius (m)	7-34	36	38	40	42	44	46	50
Load (t)	20	18.8	17.3	16	14.8	13.6	12.7	11

Notes
1. The load data of performance parameters shall be ratified according to the hanging height of the hoisting wire rope, which is 100 meters. (From the pulley of the boom head to the ground)
2. Hook at special condition and 7~10m Working Radius, the boom is under dangerous section, when shall reduce operation in special condition and the lifting load shall be no heavier than 20t. The wind shall be no stronger than force 4.
3. The boom shall be stay in the radius of 40 to 50 meters under light load condition.

FZQ800D-40T Luffing-jib Tower Crane (Large-scale construction)

Scan QR to Read
Links：https://www.globefindpro.com/products/82982.html