KATER 300
KATER300
ACETOXY SILICONE SEALANT
Property
Acid & solidified, high intensity, fast solidification, good tightness, weathering resistant, ultraviolet resistant, ozone resistant, water resistant, high and low temperature resistant.
Service Restriction
The product silicone sealant is not applicable to structure assembly or project whose base material has a surface temperature above 40℃.
Use
1. Various interior decoration glass, aluminum alloy and glass device projects
2. Various glazing projects
3. Seal & cementation of al-alloy door & window, storefront, show window, diagonal and skylight corner line
4. Good sealing performance for glass, glass fiber, pottery & porcelain and greaseless material
Instruction
1. Clean the base material with cloth: clean it with solvent; if in particular demand, coat the surface with paint base and let it dry completely.
2. Make sure fill the interface with it and tightly stick to the base material.
3. Deal with adhesion test before the use and make sure good compatibility and viscosity of products and base material
Voluntary Standard: GB/T14683-2003
Emergent Treatment
Keep out of reach of children. Once it contacts skin or eye by accident, rinse the affected part with water for 15 minutes or turn to doctor for help immediately.
Storage
Keep in dry place. Don't unseal it before use. Keep a storage temperature below 25℃ to prolong silicone sealant's service life. 12 moths guarantee.
Packing Specification: 245ml / 280ml / 300ml / 310ml(net capacity) hard package (the actual weight is subject to final products). 30ml, 60ml, 90ml, 100ml with blister card. 190kgs by drum.
Optional Color: Black, white, transparent, grey or on requested.
Testing Standard: GB/T14683-2003 《Silicone Building Sealant》
| NO. | Item | Data |
| 1 | Type | Acetoxy |
| 2 | Density (g/cm3) | 0.96 |
| 3 | Capacity movement | ±30% |
| 4 | Skinning time | 5-15 minutes |
| 5 | Drying time(2mm/h) | 10-12 |
| 6 | Drying(4mm/h) | 24-30 |
| 7 | Max. Tensile strength | 1.3 |
| 8 | Hardness shore | 20±2 |
| 9 | Elongation at Break(%) | ≥450 |
| 10 | Modulus Mpa(100%) | 0.55 |
| 11 | Application temperature | -20℃ to 40℃ |
| 12 | Temperature resistance | -50℃ to 100℃ |
| 13 | adhesive | OK |
| 14 | Weatherproof | OK |
| 15 | Cold-hot adhesive | OK |
| 16 | Under water adhesive | OK |
| 17 | Elastic Recovery Ratio (%) | 96 |
| 18 | Mass-loss Rate (%) | 40 |
| Skin drying time and fully drying time under: 23℃ and 50% humidity | ||
Links：https://www.globefindpro.com/products/83026.html
