Lithium Polymer Rechargeable Cells

Our lithium polymer rechargeable cells are manufactured based on the technologies used in making lithium ion rechargeable cells. However, they employ flexible aluminum foil package, instead of rigid aluminum case. Therefore, the size of single lithium polymer cell could be larger than that of single lithium ion type, resulting in higher capacity. In fact, the maximum capacity reaches 7550mAh. Similarly, the product could also be made in a smaller size as a result of the flexible aluminum foil package. With a wide selection of sizes, capacities and discharge rates, Li-polymer cells are processed to produce finished batteries for use in mobile phones, digital electronic products, tablet PCs, navigation systems, satellite positioning systems, model aircraft, electric tools, etc. Compared with lithium ion type products, they are more suitable for devices requiring small batteries, like Bluetooth, electronic glasses, and more.

Our company is able to provide more than 1000 models of lithium polymer rechargeable cells, can be used in laptop lithium battery and rechargeable cell phone battery. Please refer to the PDF at the bottom for detailed model information.

Specifications
Nominal voltage: 3.7V
Nominal capacity range: 15mAh-7550mAh

Dimensions
Thickness: 1.3mm-10.8mm
Width: 9.5mm-119.5mm
Height: 12mm-195mm

Operation Instruction
Discharging temperature: -20℃ - 60℃
Charging temperature: -0℃ - 45℃
Store the product in a 50% charged state

Do not store the product at fully charged state (4.20V) for a long period of time

Standard Test Conditions
The new lithium polymer cells should be tested within one month after shipment from our factory, and they shall not be cycled over five times before the tests. Unless otherwise specified, all the tests shall be conducted at an ambient temperature of 25℃ ±5℃ under humidity of 25% to 85%.

Cycle Life
The cycle life test shall be conducted as the following procedures:
Step 1: charge the cell with the standard charge method;
Step 2: discharge it at 525mA (0.5C) to 2.75V;
Step 3: repeat Step 1 and Step 2 for 500 times.
The capacity after 300 cycles is expected to be not less than 80% of the rated capacity. The capacity after 500 cycles is expected to be equal to or more than 60% of the rated capacity.

Open Circuit Voltage: 3.6V - 4.1V during shipment.

Our products conform to UL, IEC 62133 and RoHS standards.

Product Advantages
1. The lithium polymer rechargeable cell could be made in various shapes, and ultra thin type is available. It can be bent and deformed.
2. This type of product provides twice the capacity of a lithium ion cell.
3. It can be used to make single high voltage Li-polymer battery.

Related Names
Lithium Polymer Battery Supplier | Li-polymer rechargeable battery | Electric Vehicle Battery | Secondary Cell

Model Selection