PA2000 Series Power Quality Monitor

Send Message Request a Quote

PA2000 series power quality monitor is a multifunction electrical instrument with a LCD display, and the language can be selected between Chinese and English. Our product integrates programmable measurement, LCD display, digital communication, digital input as well as analog output, and it can measure a lot of parameters in power grid, such as voltage, current, active power, reactive power, apparent power, power factor, frequency, 4-quadrant electricity, 2nd-31st voltage/current harmonic content, total voltage/current harmonic distortion, voltage/current unbalance factor, voltage/current sequence component, multi-rate electricity, etc. In addition, the multi-rate electricity metering function allows 2 sets of 12 time periods and 4 rates.

Technical Parameters

Item			Data
Accuracy			Electricity: Grade 0.2
			Harmonic wave: Class B
			DC: Grade 0.5
			Frequency: ±0.01Hz
			Active power: 0.5S
			Reactive power: Class 1
			Analog output: Class 0.5
Display			Dot-matrix LCD or big-screen TFT LCD
Signal Input	Wiring Mode		Single phase, 3-phase 3-wire, 3-phase 4-wire
	Voltage	Rated Value	AC100V, AC380V
		Overload	Continuous: 1.2 timesInstantaneous: 2 times/10 seconds
		Power Consumption	<1VA for each phase
		Impedance	>200kΩ
	Current	Rated Value	AC1A, AC5A
		Overload	Continuous: 1.2 timesInstantaneous: 2 times/10 seconds
		Power Consumption	<0.4VA for each phase
		Impedance	<20mΩ
Frequency			45-65 Hz
Harmonic Measurement Item			Total harmonic distortion of voltage/current, 2nd-31st harmonic content
Electricity Calculation			Two-way active and reactive electricity
Power Supply	Working Range		AC/DC 80V~270V
	Power		<5VA
Function Module	Pulse Output		2 optical coupler isolated outputs
	Communication		Port: 2 RS-485 portsProtocol: Modbus-RTUBaud rate: 2400~19200bps
			Wireless communication: 1 GSM, and the format is GSM-PDU
	Digital Input		12 ways at the most, and it is dry contact type
	Relay Output		4 ways of relay output at the most (AC250V/5A, DC30V/5A), or solid relay output
	Analog Output		Max.: 4 ways output0/4~20mA or 0/1~5V
	DC Measurement		There are 2 ways of DC input measurement at most, and the current range is 0-20mA. The alarming output is programmable.
Working Condition			Ambient temperature: -10~55℃Relative humidity: ≤93%Altitude: ≤2500mNo corrosive gas
Storage			Temperature: -25~70℃Relative humidity: ≤93%
Safety	Insulation		Resistance between signal/power supply/output and shell: >100MΩ
	Withstand Voltage		Between power supply and input: ≥2kVBetween power supply and output: ≥2kVBetween output and input: ≥1kV
Overall Size	Front Panel		PA2000-3: 96×96mm, PA2000-4: 120×120mm
	Hole		PA2000-3: 91×91mm, PA2000-4: 111×111mm

Aside from features illustrated above, this power quality monitor also possesses other functions, including digital input, relay output, analog output, demand recording, SOE recording, automatic data logging, bi-directional electricity measurement, etc. Additionally, it supports the communication protocol of Modbus-RTU.

As an advanced, intelligent and digital front-end data collecting device for power grid, PA2000 series power quality monitor can directly replace conventional measuring instrument, power meter, harmonic meter as well as relevant auxiliary devices, and it is widely accepted in many fields, such as control system, industrial automation, intelligent building, switch cabinet, intelligent distribution panel, energy management system, automation project in substation, power distribution network automation, power monitoring system in residential area, etc.

Meanwhile, our product also features easy installation, simple wiring, convenient maintenance, little construction work, on-site programming and parameter inputting, etc. Thus, it is suitable for building up network for different PLC and computer communication software in industries.

Model Selection

Related Names
Electricity Tester | Intelligent Monitoring Instrument | Power Disturbance Device

Scan QR to Read
Links：https://www.globefindpro.com/products/84991.html