Home Gas Generator Set

Gas Generator Set

This gas generator set is a new type of genset, which is developed to adapt to the world's environmental requirements and the new market environment. It adopts the natural gas, biogas, oil field gas, blast furnace gas, and other substances as its fuel materials. Additionally, it acts as a new type of eco-friendly propulsion force that can substitute for fuel oil.


Our product makes full use of various natural gas or harmful gas as its fuel materials, providing such advantages as safe operation, huge benefits, low emissions, combined heat and power, and some others. It is basically applied in different places where the combustible gases exist, such as oil fields, gas fields, chemical enterprises, villages, breweries, refuse landfills, and sewage treatment plants, among others. Owing to stable performance and reliable quality, our gas generator set can represent a hi-tech level of Chinese gas power at present.


Strengths
This gas generator set features a wide range of output power, highly reliable operation, superior power generation, light weight, small size, simple maintenance, small low-frequency noise, and some others. Generally speaking, it is provided with four advantages listed as follows.


1. Superior Power Generation
The gas generator set conducts only rotational motion during operation, thus offering the quick response of electronic speed regulation, rather stable operation, the high precision of output voltage and frequency, as well as the small fluctuation. The rotational speed of the machine set remains stable, even when the load is suddenly increased or decreased. With regard to the electrical performance, our product is superior to the diesel generator set.
2. Outstanding Starting Performance and A High Success Rate of Startup
In use of our product, it takes only 30 seconds to achieve the success of cold start as well as the full load. However, the diesel generator requires 3 minutes to carry the load after the startup success in accordance with the international standard.
3. Low Noise and Small Vibration
Depending on its extremely small vibration and small low-frequency noise, the gas generator set is superior to the diesel generator set.
4. The combustible gas adopted is a clean and cheap source of energy.
By utilizing the methane gas, straw gas, biogas and some others as fuel materials, the gas generator set can not only feature trustworthy operation and low cost, but also turn waste into wealth and cause no pollution.


Components
Bosch Sensor from Germany Ignition Coil Holset Gas Turbocharger from America
Fittings Dedicated for Gas Engine ( Some companies adopt the fittings for diesel engine, instead of the fittings dedicated for gas engine.) Madas Pressure Regulator from Italy

Precautions
1. The generator room should be far away from the fire area.
2. The generator room ought to be spacious and bright. Moreover, it is requested to be installed with the ventilator, for the purpose of guaranteeing superb ventilation.
3. During the installation of our gas generator set, both chassis and foundation should be leveled in use of flat shims. The contact area should be over 60%, and the distribution must be uniform.
4. The interior system is installed with the lighting, switch, line, and the anti-explosive electrical equipment which is firmly fixed.
5. Furthermore, the generator room should be equipped with the fire extinguisher and other fire protection equipment in full compliance with the fire safety requirements.
6. The generator room is also mounted with the combustible-gas warning device, so the combustible gas leak can be timely detected.
7. Outside the gas pipeline of a single gas generator of below 60kW, the internal diameter of the main pipe should be no less than 2 inches. In addition, the internal diameter of the part near the engine ought to be no less than 1 inch. For the gas generator set of over 60kW, the internal diameter is respectively 3 inches and 2 inches.
Moreover, this product must be assembled with the gas valve (stainless steel ball valve), drain valve, and the anti-backfire device. After the gas pipeline welding process is completed, the welding slag should be eliminated with high-pressure air.
8. The fuel gas must go through such processes as desulfurization, dehydration, and dust removal. Its sulfur content is at most 0.25Nm3, and its hydrogen content is no more than 10%.

Gas Generator Set

Technical Parameters
Genset Model Rated Power (kW) Rated Rotational Speed (rpm) Rated Current (A) Cooling Method Speed Regulation Method Engine Model Engine Power (kW) External Dimension (mm)
HY-10GFQ 10 1500 18 Closed water cooling Electronic speed controller HY485Q1 13 1350x750x1170
HY-12GFQ 12 1500 21.6 Closed water cooling Electronic speed controller HY 485Q2 15 1350x750x1170
HY-15GFQ 15 1500 27 Closed water cooling Electronic speed controller HY 4100Q 25 1650x730x1250
HY-20GFQ 20 1500 36 Closed water cooling Electronic speed controller HY 4100Q 25 1650x730x1250
HY-25GFQ 25 1500 45 Closed water cooling Electronic speed controller HY4105Q 38 1900x750x1280
HY-30GFQ 30 1500 54 Closed water cooling Electronic speed controller HY4105Q 38 1900x750x1280
HY-50GFQ 50 1500 90 Closed water cooling Electronic speed controller HY6105Q 58 2100x770x1300
HY-100GFQ 100 1500 180 Closed water cooling Electronic speed controller HY6126Q 130 2800x1100x1900


Related Names
Gas Engine Powered Device | CNG Generating Sets | Natural Gas Powered Electric Generator


Recommended Products
Hot Products