The PN series mud pump comes with only one impeller. It is horizontal centrifugal pump that allows entry of fluid from only side. Its pumping components are made of abrasion-resistant alloy materials. Clearance between the impeller and cover plate can be freely adjusted to ensure the pump always operates at a high efficiency. For vanes below 6-inch, screws are used to connect the vane to the shaft. Vanes above 8-inch are fastened to the shaft by the keyed joint.
Packing seal is utilized to offer a tight seal for the shaft. Upon starting the pump, remember to fill water of a pressure more than 1kg/cm2 in the pump. The simple pump structure allows easy inspection and repair. Reliable and long lasting, the mud pump is well suited for use in the mining industry, where it is employed to transport solid and liquid mixture with a maximum mass concentration between 50% and 60%.
Purchase Order Number
Example: 2PN
2-outlet diameter(inch); P-slurry pump; N-slurry
Type | Volumetric Flow Rate Q(m3/h ) | Head H(m) | Rotational Speed n(r/min) | Net Positive Suction Head NPSHr(m) | Efficiency η(%) | Power N(KW) | Weight (Kg) | Diameter D(mm) | ||
Shaft Output Power | Motor Power | Inlet Diameter | Outlet Diameter | |||||||
1PN | 7.2 12 16 | 14 13 12 | 1430 | 0.55 | 21 30 35 | 1.3 1.41 1.5 | 3 | 120 | 50 | 25 |
2PN | 30 47 58 | 22 19 17 | 1450 | 1.32 | 33 39 39 | 5.45 6.25 6.9 | 11 | 150 | 96 | 50 |
3PN | 54 108 151 | 26 21 15 | 1470 | 2.35 | 32 42 37 | 12 14.7 16.7 | 22 | 450 | 125 | 75 |
4PN | 100 150 200 | 41 39 37 | 1470 | 2.95 | 46 55 61 | 24.3 29 33.1 | 55 | 1000 | 150 | 100 |
4PN(1) | 41.5 80 111 | 51 50 49 | 1470 | 1.92 | 23 36 44.5 | 25 30.2 33.1 | 55 | 1000 | 150 | 100 |
4PN(2) | 52 100 138 | 51 50 49 | 1470 | 2.2 | 26 37 47 | 28 37 39 | 75 | 1000 | 150 | 100 |
6PN | 230 280 320 | 27 26 25 | 980 | 2.59 | 56 60 62 | 30.2 33 35.2 | 75 | 2.59 | 200 | 150 |
Related Names
Sludge Transfer Pump | Reciprocating Pump | Centrifugal Mud Pump