N Type Cutting Plotter
N Type Cutting Plotter
The N type cutting plotter yields perfect output without any saw tooth at high speed. The maximum cutting speed is 500 mm/s. Paper can be fed in both forward and reverse directions. The plotter also has an emergency stop function and the original point can be set freely. Due to the adoption of switching power supply, its operation won't be influenced by voltage change.
This cutting plotter adopts the most advanced subdivision circuit and makes low noise. Because of the circuit’s low power consumption, there doesn’t need a fan for heat radiation so as to ensure long and reliable operation. Cutting speed and cutting pressure are recorded with memorial storage. In addition, there is no collision with the adopted double photoelectric reset.
Parameters
Type | HX-360N | HX-720N | HX-800N | HX-960N | HX-1120N | HX-1360N | HX-1780N |
Maximum paper feed width | 360mm(14.2'') | 720mm (28.4") | 800mm (31.5") | 960mm (37.8") | 1120mm (44.1") | 1360mm (53.6") | 1780mm (70.1'') |
Real cutting range | 330mm(13.0'')* limitless length | 630mm(24.8") * limitless length | 720mm(27.6") * limitless length | 860m(33.9") * limitless length | 1010m(39.8") * limitless length | 1250m(49.2") * limitless length | 1680m(70.1") * limitless length |
Cutting speed | 25mm/s-500mm/s(0.98"/s-19.7"/s) | ||||||
Cutter pressure | 25-500g Grade 16-32 | ||||||
English LCD | With | ||||||
Mechanical resolution | 0.0254 mm/step(0.001"/step) | ||||||
Blade type | Swivel standard blade (Compatible with Roland blade) | ||||||
Interfaces | USB 2.0 and RS232 serial interface | ||||||
Commands/ Language | HP-GL / DMPL compatible | ||||||
Bracket | With | ||||||
Links：https://www.globefindpro.com/products/91509.html
