Adsorption Air Dryer

Send Message Request a Quote

Adsorption Air Dryer

If the water vapor and the water vapor in compressed air iscooled down in the pipe, serious problems will be caused. Our adsorption air dryer usesdesiccant to bring the dew point of the water vapor down to -40℃ or below. Our adsorption air dryer alsoapplies heatless regeneration. The desiccant in the vessel can be regeneratedat lower pressure, with regeneration air consumption smaller than 15%.

The temperature of inlet compressed air is typically 40℃. The working pressure is ordinarily 7 bar with a maximum of 10 bar. Thepressure of inlet air ranges from 0.6 to 1.0 Mpa, while the pressure loss of our dryer is lessthan 0.02 Mpa.

Our adsorption air dryer is coded in two parts. Forexample, DH-55 indicates that the model is an adsorption air dryer by thecapital DH. While 55 indicates the flow capacity is 5.5 cubic meter per minute.

Technical Specificationsof the Adsorption Air Dryer

Model	Capacity	Inlet/Outlet	Dimension L×W×H (mm)	Net Weight (KG)
Model	(M3/min)	Inlet/Outlet	Dimension L×W×H (mm)	Net Weight (KG)
DH-12	1.2	G1	780×500×1600	110
DH-26	2.6	G1	960×500×1880	150
DH-36	3.6	G1	960×500×2080	160
DH-55	5.5	G1 1/2	1000×500×1920	220
DH-69	6.9	G1 1/2	1070×500×1860	350
DH-85	8.5	G 2	1230×600×1820	430
DH-110	11	G 2	1230×600×2040	460
DH-135	13.5	G 2	1230×600×2240	520
DH-170	17	DN 65	1600×600×2400	720
DH-220	22	DN 65	1700×700×2250	890
DH-270	27	DN 80	1700×700×2550	950
DH-320	32	DN 80	1900×750×2640	1320
DH-450	45	DN 100	2100×900×2660	1550
DH-550	55	DN 100	2200×950×2710	1880
DH-650	65	DN 100	2300×1000×2810	2250
DH-850	85	DN 125	2500×1100×2910	2810
DH-1100	110	DN 150	3000×1600×3225	4150
DH-1400	140	DN 150	3000×1700×3225	4980

As a China-based adsorption air dryer manufacturer and supplier, SUCCESS ENGINEalso provides air receiver, air compressor station, portable diesel aircompressor, VSD screw air compressor, and much more.

Scan QR to Read
Links：https://www.globefindpro.com/products/91793.html

Recommended Products