Pipe Fittings Steel Cross

Pipe Fittings Steel Cross

The steel pipe cross is used when there is a branchon the main pipeline that needs to be connected. When the size of the branch isthe same as the header pipe equal cross is used and when the branch size isless than the header size, then, unequal cross is better. Our company applies hydroforming and hot press forming tomanufacture steel crosses which are made of seamless pipe. Hydroforming can complete steel pipe crossshape forming at once, thus getting high efficiency.

Materials formaking our pipe cross are often low carbon steel, low alloy steel and stainlesssteel to strain hardening tendency. However, if hot press forming technology isadopted and equipment required is of small tonnage. Besides, large diameter andlarge wall thickness steel cross are usually manufactured by means of hot pressforming.

The maximumwall thickness of the steel pipe cross is 150 mm and some schedule numbers are sch10, sch20,sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, sch5s, sch20s, sch40s andsch80s. Our steelcross and related pipe fittings are widely used in electricity,gasoline, petrochemical, ship building, heat supply network, paper making andmetallurgical industries among others. 

Raw Materials
Many materials can be used to manufacture the steel pipe cross.
Carbon Steel: ASTM/ASME A234 WPB-WPC
Alloy Steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless Steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Low Temperature Steel: ASTM/ASME A402 WPL 3-WPL 6
High Performance Steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70

Specifications of the Steel Pipe Cross

 
Standard Available
Our company supplies steel pipe cross of different standards and detailed information is listed bellow.
GB/T12459-2005 GB/T13401-2005
SY/T0510-1998
ASME B16.9-2007 ASME B16.25-2007
CSA Z245.11-05-2005