PWM Solar Charge Controller
PWM Solar Charge Controller
Model: CMSeries
The PWM solar charge controller is intelligent and multi-purpose.It uses fixed the LCD display, with a veryfriendly interface; various control parameters can be flexibly set, to fullymeet your various application requirements
Features of the Solar Charge Controller
1. The PWM solarcharge controller has the image of LCD graphic symbol.
2. It offers simple button operation.
3. It has an automatic identification system voltage level.
4. The PWM solar charge controller offers intelligent PWM charge mode,automatic temperature compensation, adjustable charge-discharge controlparameters, settable operating mode of load, and overload, short circuitprotection.
5. It has remote monitoring and control function (custom).
6. The PWM solar charge controller offers battery reverse-discharge protection,battery low voltage disconnection (LVD), and battery reverse connectionprotection.
7. It offers the accumulated function of charge and discharge Ampere hours.
Technical Specifications of thePWM Solar Charge Controller
| Data Model | CM2024Z | CM3024Z | CM2048 | CM3048 | Data Model | CM3024Z | CM3048 |
| Rated Current | 20A | 30A | 20A | 30A | Installation Cable Area | ≤ 7# AWG (16mm2) | |
| Rated Voltage | 12V/24V | 48V | Operating Temperature | -10℃~60℃ | |||
| Open Circuit Voltage of Solar Panel | ≤ 50V | ≤ 100V | Storage Temperature | -30℃~70℃ | |||
| Low Voltage Disconnection(LVD) | 10.7V/21.4V | 42.8V | Humidity Requirements | ≤90 ％, no condensation | |||
| Float Voltage | 13.8V/27.6V | 55.2V | Size | 90 mm×188 mm×48 mm | |||
| Low Voltage Reconnection(LVR) | 12.5V/25.0V | 50.0V | Mounting Hole Spacing | 60 mm×178 mm -Φ5 | |||
| No Load Loss | ≤ 30mA | ≤ | Weight | 360g | |||
| Loop Voltage Drop | ≤ 170mV | ≤ | Notes | Model suffix “Z” represent automatic identify system voltage level, “T” represent controller with remote monitoring | |||
| Charging Mode | PWM mode | ||||||
| Temperature Compensation | -4mV/Cell/℃ | ||||||
| Data Model | CM5024Z | CM5048 | Data Model | CM5024Z | CM5048 |
| Rated Current | 50A | Installation Cable Area | ≤3 # AWG (<25mm2) | ||
| Rated Voltage | 12V/24V | 48V | Operating Temperature | -20℃~50℃ | |
| Open Circuit Voltage of Solar Panel | ≤ 50V | ≤ 100V | Storage Temperature | -30℃~70℃ | |
| Low Voltage Disconnection(LVD) | 10.7V/21.4V | 42.8V | Humidity Requirements | ≤90 ％ ,no condensation | |
| Float Voltage | 13.7V/27.4V | 54.8V | Size | 130 mm×188 mm×62mm | |
| Low Voltage Reconnection(LVR) | 12.6V/25.2V | 50.4V | Mounting Hole Spacing | 90 mm×178 mm --Φ5 | |
| No Load Loss | ≤ 30mA | ≤ | Weight | 590g | |
| Loop Voltage Drop | ≤200 mV | ≤ | Notes | Model suffix “Z” represent automatic identify system voltage level, “T” represent controller with remote monitoring | |
| Charging Mode | PWM mode | ||||
| Temperature Compensation | -4mV/Cell/℃ | ||||
Our company is a major solar charge controller manufacturer based in China. Ourproducts include solar charge controller, micro grid tie inverter, pure sinewave inverter, monocrystallinesolar panel, and much more.
Links：https://www.globefindpro.com/products/92727.html
-
150W-3KW Modified Sine Wave Inverter
-
200W Waterproof Grid Tie Inverter
-
433MHZ RF Receiver Module
-
ASK RF Receiver Module
-
PCS Wideband Pico Repeater
-
315-433MHz RF Receiver Module
-
1-3KW Wind Solar Hybrid Controller
-
Wind Solar Hybrid Street Light Controller
-
300W-500W Wide Volt Grid Tie Inverter
-
MPPT-10/20 MPPT Solar Charge Controller
-
Polycrystalline Solar Panel
-
5-20KW Wind Solar Hybrid Controller
