GSM Selective Band Repeater

Send Message Request a Quote

GSM Selective Band Repeater
RCTG900X2365
RCTGX

The GSMselective band repeater is applied specifically in small area indoor DAS system. It provides quick coverage solution for weak signalsand block zones reducing drop/off calls; it eliminates the signal dead spot,rejecting the interference and providing a stable signal communication for cellphone users. The GSM selectiveband repeater has power supply and output power indications;with ALC function design provides the highreliability and stability and low interference toBTS. It has compact size, low power consumption and easy installation. The GSM selective band repeatercan be used in basements, cars,elevators, parking lots, villages, tunnels, mines, clubs, residential houses,countryside, tall buildings, vessels, underground facilities or any otherplace.

Electrical Specification of GSMSelective Band Repeater
Uplink

Item	Electric SPEC		Unit
Frequency range	880-915MHz	/	/
Operating Bandwidth	880-915MHz	0-35M	MHz
Maximum Output power		0~23	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain		≥ 60	dB
Gain Adjust Scope	1dB ～ 10dB	\|Δ\|≤1	dB
	10dB ～ 20dB	\|Δ\|≤1	dB
	20dB ～ 25dB	\|Δ\|≤1.5	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Ripple in band		≤6	dB
Out of band rejection	Fo /-400kHz	≤50	dB
	Fo /-600kHz	≤40	dB
	Fo /-1MHz	≤35	dB
	Fo /-5MHz	≤25	dB
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2	/
Noise Figure at Max. System Gain		≤8	dB
System Group Delay		≤5.5	μs
Frequency Stability		≤0.05ppm	Hz

Downlink

Item	Electric SPEC		Unit
Frequency range	925-960MHz	/	/
Operating Bandwidth	925-960MHz	0-35M	MHz
Maximum Output power		0~23	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain	940-955MHz	<=65	dB
Gain Adjust Scope	1dB ～ 10dB	\|Δ\|≤1	dB
	10dB ～ 20dB	\|Δ\|≤1	dB
	20dB ～ 25dB	\|Δ\|≤1.5	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤7	dB
Out of band rejection	Fo /-400kHz	≤50	dB
	Fo /-600kHz	≤40
	Fo /-1MHz	≤35
	Fo /-5MHz	≤25
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2	/
Noise Figure at Max. System Gain		≤8	dB
System Group Delay		≤5	μs
Frequency Stability		≤0.05ppm	Hz

Mechanical Characteristic of GSM Selective Band Repeater

Mechanical Characteristic
Connectors	N-female
Power Supply	DC6V 3A, AC 110~240V
Operating Temperature	-10 ℃ ~ 50℃
Humidity	90%
Power Consumption	≤10W max
Dimension(DWH)	22012565( mm)
weight	≤3kg

Note: Typicalspecifications at room temperature. VSWR test condition is uplink and downlinkATT setting 25dB

LED Function Indication for GSMSelective Band Repeater

LED	Function	Working mode	Failure
Uplink Red Light	Warning for Autoexcitation, improper and AGC over limited.	The light flickers once	Improper warning
		The light continuously flickers twice	Autoexcitation warning
		The light continuously flickers three times.	AGC over limit warning
Downlink Red Light	Warning for Autoexcitation, improper, AGC over limited and invalidation of PA.	The light flickers once	Improper warning
		The light continuously flickers twice	Autoexcitation warning
		The light continuously flickers three times.	AGC over limit warning
		The light continuously flickers four times.	Warning of invalidation of PA
Green Light	Indication light of power supply	LED light is on, device is working normal.	LED light is off, device is not working normal

Shoulder is a professional GSM selective band repeater manufacturer based inChina. Our company offers a wide range of products, including SAW filter,crystal resonator, TCXO, RF module, and much more.

Scan QR to Read
Links：https://www.globefindpro.com/products/92746.html