CDMA Wideband Pico Repeater

Send Message Request a Quote

CDMA Wideband Pico Repeater
RCTC800K1555
RCTCK-15

TheCDMA wideband pico repeater is applied specifically in small area indoor DAS system. It provides quick coverage solution for weak signaland block zones reducing drop/off calls; it eliminates the signal dead spot,rejecting the interference and providing a stable signal communication for cellphone users. The CDMA wideband pico repeater has power supply and outputpower indications; with ALC function design providesthe high reliability and stability and lowinterference to BTS. It has compact size, low power consumption and easyinstallation. The CDMA wideband picorepeater can be used in basements, cars, elevators, parkinglots, villages, tunnels, mines, clubs, residential houses, countryside, tall buildings,vessels, underground facilities or any other place.

Electrical Specification of CDMAWideband Pico Repeater
Uplink

Item	Electric SPEC		Unit
Frequency range	824-849MHz	25	MHz
Operating Bandwidth	824-849MHz	25	MHz
Maximum Output power		≤15	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain		≥55	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2.0	/
Noise Figure at Max. System Gain		≤7	dB
System Group Delay		≤1	μs
Frequency Stability		≤0.05ppm	Hz

Downlink

Item	Electric SPEC		Unit
Frequency range	869-894MHz	/	/
Operating Bandwidth	869-894MHz	25	MHz
Maximum Output power		≤15	dBm
ALC		\|Δ\|≤2	dB

Maximum Gain		≥55	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2.0	/
Noise Figure at Max. System Gain		≤7	dB
System Group Delay		≤1	μs
Frequency Stability		≤0.05ppm	Hz

Mechanical Characteristic of CDMAWideband Pico Repeater

Connectors	N-female
Power Supply	DC4.75—5.25V ， AC 110~240V
Operating Temperature	-10 ℃ ~ 50℃
Humidity	90%
Power Consumption	≤10W max
Dimension(DWH)	15211025( mm)
weight	≤0.7kg

Note: Typical specifications at room temperature. VSWR test condition isuplink and downlink ATT setting 25dB

LEDFunction Indication for CDMA Wideband Pico Repeater

LED	Function	Working mode	Failure
RED light in the middle	Indication of downlink power	The more downlink output power, brighter the LED	Connect with power supply, the LED is bright while there is no conversation, downlink is under autoexcitation.
The red light in the left side	Indication of uplink power	The more uplink output power, brighter the LED	Connect with power supply, the LED is bright while there is no conversation, uplink is under autoexcitation.
Green light	Indication of power supply	LED on means there is power supply	The power supply is not working normally if the LED light is off.

As a professional CDMA wideband pico repeater manufacturer and supplier inChina, we also offer WiFi module, crystal resonator, TCXO, RF module, and more.

Scan QR to Read
Links：https://www.globefindpro.com/products/92748.html