WCDMA Wideband Pico Repeater

Send Message Request a Quote

WCDMA Wideband Pico Repeater
RCTW2G1K1555
RCTWK-10

The WCDMA wideband pico repeater works insmall areas indoor for DAS system. It providesquick coverage solution for small or weak signal and block zones reducingdrop/off calls. It eliminates the signal dead spot; itrejects the interference and provides a stable signal communication. It hascompact size, low power consumption and easy installation. The WCDMA wideband pico repeater can be used in basements, cars, elevators, parkinglots or any other place.

Electrical Specification of WCDMA Wideband Pico Repeater
Uplink

Item	Electric SPEC			Unit
Frequency range	1920-1980MHz		60	MHz
Operating Bandwidth	1920-1980MHz		60	MHz
Maximum Output power			≥10	dBm
ALC			\|Δ\|≤2	dB
Maximum Gain			≥55	dB
IM3			≤-30/30kHz	dBc
Ripple in band			≤6	dB
Spurious Emission	9kHz ～ 150kHz		≤-36/1kHz	dBm
	150kHz ～ 30MHz		≤-36/10kHz
	30MHz ～ 1GHz		≤-36/100kHz
	1GHz ～ 12.75GHz		≤-25/1MHz
VSWR			≤2.0	/
Noise Figure at Max. System Gain		≤7		dB
System Group Delay		≤1		μs
Frequency Stability		≤0.05ppm		Hz

Downlink

Item	Electric SPEC		Unit
Frequency range	2110-2170MHz	/	/
Operating Bandwidth	2110-2170MHz	60	MHz
Maximum Output power		≥10	dBm
ALC		\|Δ\|≤2	dB

Maximum Gain		≥55	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2.0	/
Noise Figure at Max. System Gain		≤7	dB
System Group Delay		≤1	μs
Frequency Stability		≤0.05ppm	Hz

MechanicalCharacteristic of WCDMA Wideband Pico Repeater

Mechanical Characteristic
Connectors	N-female
Power Supply	DC4.75—5.25V, AC 110~240V
Operating Temperature	-10 ℃ ~ 50℃
Humidity	90%
Power Consumption	≤10W max
Dimension(DWH)	15211025( mm)
weight	≤0.7kg

Note: Typical specifications at room temperature. VSWR test condition isuplink and downlink ATT setting 25dB

LEDFunction Indication for WCDMA Wideband Pico Repeater

LED	Function	Working mode	Failure
RED Light in the middle	Indication for downlink power	The more downlink output power, brighter the LED	Connect with power supply, the LED is bright while there is no conversation, downlink is under autoexcitation.
The red light in the left hand side	Indication for uplink power	The more uplink output power, brighter the LED	Connect with power supply, the LED is bright while there is no conversation, uplink is under autoexcitation.
green light	Indication for power supply	LED on means there is power supply	The power supply is not working normally if the LED light is off.

We are a professional WCDMA wideband Pico repeater manufacturer and supplier inChina. We offer various types of products such as TCXO, SAW filter, SAWresonator, and WiFi module.

Scan QR to Read
Links：https://www.globefindpro.com/products/92749.html