WCDMA Selective Band Repeater

Send Message Request a Quote

WCDMA Selective Band Repeater
RCTW2G1X1555
RCTWX

The WCDMA selective band repeater isapplied specifically in small area indoor DAS system. It provides quick coverage solution for small signal weak andblock zones reducing drop/off calls; it eliminates the signal dead spot,rejecting the interference and providing a stable signal communication for cellphone users. The WCDMA selective band repeater has power supply and output power indications; with ALC function design provides the high reliabilityand stability and low interference to BTS. It hascompact size, low power consumption and easy installation. The WCDMA selective band repeater can be used in basements,cars, elevators, parking lots, villages, tunnels, mines, clubs, residentialhouses, countryside, tall buildings, vessels, underground facilities or anyother place.

Electrical Specification of WCDMA Selective Band Repeater
Uplink

Item	Electric SPEC		Unit
Frequency range	1920-1980MHz	/	/
Operating Bandwidth	1920-1980MHz	5~60	MHz
Maximum Output power		0~15	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain		≥ 60	dB
Gain Adjust Scope	1dB ～ 10dB	\|Δ\|≤1	dB
	10dB ～ 20dB	\|Δ\|≤1	dB
	20dB ～ 25dB	\|Δ\|≤1.5	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Ripple in band		≤6	dB
Out of band rejection	Fo /-5MHz	≤45	dB
	Fo /-10MHz	≤45	dB
	Fo /-12.5MHz	≤35	dB
			dBm
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	/
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2	dB
Noise Figure at Max. System Gain		≤8	μs
System Group Delay		≤5.5	Hz
Frequency Stability		≤0.05ppm

Downlink

Item	Electric SPEC		Unit
Frequency range	2110-2170MHz	/	/
Operating Bandwidth	2110-2170MHz	5~60	MHz
Maximum Output power		0~15	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain		<=65	dB
Gain Adjust Scope	1dB ～ 10dB	\|Δ\|≤1	dB
	10dB ～ 20dB	\|Δ\|≤1	dB
	20dB ～ 25dB	\|Δ\|≤1.5	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤7	dB
Out of band rejection	Fo /-5MHz	≤45	dB
	Fo /-10MHz	≤45
	Fo /-12.5MHz	≤35

Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2	/
Noise Figure at Max. System Gain		≤8	dB
System Group Delay		≤5	μs
Frequency Stability		≤0.05ppm	Hz

MechanicalCharacteristic of WCDMA SelectiveBand Repeater

Mechanical Characteristic
Connectors	N-female
Power Supply	DC6V 3A ， AC 110~240V
Operating Temperature	-10 ℃ ~ 50℃
Humidity	90%
Power Consumption	≤10W max
Dimension(DWH)	14610425( mm)
weight	≤1g

Note: Typicalspecifications at room temperature. VSWR test condition is uplink and downlinkATT setting 25dB

LED Function Indication for WCDMASelective Band Repeater

LED	Function	Working mode	Failure
Red Light	Warning	Red LED is off, the device is working normal.	Connect with power supply, LED is on while there is no conversation, which means autoexcitation warning or loosening of lock.
Green Light	Indication for power supply	LED is flickering, the device is working normal.	LED is off; the power supply is not working normal.

As an experienced WCDMA selective band repeater manufacturer and supplier inChina, we not only provide Pico repeater, but also offer SAW filter, crystalresonator, RF module, and SAW resonator, among others.

Scan QR to Read
Links：https://www.globefindpro.com/products/92750.html