200W-1000WMicro Grid Tie Inverter
System Function
This micro grid tie inverter can be directlyconnected to the solar panels, and there is no need to connect the battery.With precise maximum power point tracking function and automatic power lockingfunction, the inverter automatically adjust the maximum output power of thesolar panels.
AC Zero Phase Angle with HighPrecision Auto-detection
After isolationand amplification, the AC zero phase angle is then input to the MCU forhigh-precision detection and analysis.
The phase shiftrate is less than 1%, achieving high-precision together with phase modulationAC output.
Synchronous High-frequency Modulation
Unlike traditional grid tie inverters, our micro grid tie inverter firstlyrectifies the AC current into 100Hz half-cycle AC current, and then combinesthe high frequency current it produces and the 100Hz current, thus achievinghigh-frequency modulation.
Pure Sine Wave Output
This grid tie inverter uses SPWM to make pure sine wave output.
Maximum Power Point Tracking(MPPT)
Because the current intensity and the voltage changes at any time, ifthere is no power point tracking, there will be a lot of problems. In the pasttime, usually adopt a solar controller, but this product uses high-precisionMPPT operation power, automatic and immediate adjust the solar panels outputpower at the maximum output point, thenachieve a stable output purposes.
Power Automatically Locked(APL)
In different current fluctuations, we should use the MPPTfunction. When the MPPT function adjusted to the maximum power point,the product automatically powers locked in maximum power point, then made theoutput power more stable.
AutomaticallyAdapt To Different Load Power Factor
ConstantCurrent, Constant Power without any overload, over currentphenomenon
AutomaticallyShut Down When The Power Output Of a Fault
Current Limit Protection
StackMultiple Machines in parallel can achieve large output power.
High-FrequencyHigh Conversion Rate
Technical Specifications of the200W-1000W Micro Grid Tie Inverter
Grid-series Models | 200W | 300W | 400W | 5 00W | 600W | 8 00W | 1000 W | |
Recommend use Solar Panels | 32 0Wp | 42 0Wp | 52 0Wp | 62 0Wp | 72 0Wp | 1050 Wp | 1250 Wp | |
DC Maximum Input Power | 300W | 400W | 500W | 600W | 700W | 900W | 1200W | |
DC Maximum Voltage | Vpv DC 30.2 VDC | |||||||
DC Voltage Range | Vpv 10.5 V~ 2 8VDC | |||||||
Maximum Output Power Factor | 99% | |||||||
Maximum Input Current | 15A | 20A | 25A | 30 A | 40A | 45 A | 65A | |
AC Output Power | 200W | 300W | 400W | 5 00W | 600W | 8 00W | 1000 W | |
AC Maximum Output Power | 200W | 300W | 400W | 5 00W | 600W | 1000W | ||
Anti-voltage Protection | Fuse | |||||||
AC Standard Voltage Range | 9 0V-1 4 0 / 1 8 0~260VAC | |||||||
AC Frequency Range | 55Hz~ 6 3 Hz / 45Hz -53Hz | |||||||
Output Current Total Harmonic Distortion | THDIAC <5% | |||||||
Phase | <1% | |||||||
Islanding Protection | VAC ; f AC | |||||||
Output Short Circuit Protection | Current -limiting | |||||||
Show | LED | |||||||
Standby Power | < 2 W | |||||||
Night Power | <1W | |||||||
Ambient Temperature Range | -25 ℃ ~60 ℃ | |||||||
Humidity | 0~ 99 % (Indoor Type Design) | |||||||
Waterproof | Indoor Type Design | |||||||
Electromagnetic Compatibility | EN50081.part1 EN50082.part1 | |||||||
Power System Disturbance | EN61000-3-2 EN60950-1 | |||||||
Network Test | DIN VDE 1 0 26 |
Packing and Weight of the Micro Grid TieInverter
Net Weight | 1. 3 kg (200—600W) | 2.0kg (800—1000W) |
G Weight | 2.0kg (200—600W) | 2.7kg (800—1000W) |
Size (L x W x H) | 21 x 16.5 x 5.3 cm | 31 x 16.5 x 5.5 cm |
Package (L x W x H) | Inner box:34x25x15.5CM Big box:51x37x33CM | Inner box :43x25x15.5C Big box:52x45x33CM |
Installation | Wall hanging | |
AC power Cord Length | 1. 8 m | |
Cooling | Fan | |
Show | 1 Red and 1 Green LED |
We are a 200W-1000W micro grid tie inverter manufacturer and supplier based in China. We offera variety of products including our grid tie inverter, solar panel, off-gridinverter, wind turbine and much more.