Thermal Conductivity Gas Analyzer

Send Message Request a Quote

Thermal Conductivity Gas Analyzer

The thermal conductivity gas analyzer determinates gas concentrations by measuring the thermalconductivity of the gas, CI2000-RQD analyzer uses advanced thermal conductivitysensor with single chip technology. The thermal conductivity gasanalyzer adopts platinum thread as sense organ to make upbridge imbalance, which output signal has a relationship with tested gasvolume. And the single chip will magnify, sieve wavelength, modify linearly andcriteria the signal by electric procedure, then, output direct ratio signal tothe tested gas concentration.

The thermal conductivity gas analyzeris extensively used in measuring H2 concentration in H2 production line, supplygas and cycle gas for ammonia and fertilization production. Also in cycle gasfor hydrogen-cooled generator, in environment air or industrial container andmeasuring exceed H2 concentration in argon production.

The thermal conductivity gas analyzermeasures CO2 concentration in combustion exhaust gas of industrial boilers orfurnaces, Ar concentration in ammonia distillation and Arconcentration in percent argon.

Features of the Infrared GasAnalyzer

1. Importedcorrosion-resistance sensor, intercross resistance and advanced digitalprocessing

2. Low drift electricbridge with high stability and good reliability

3. The thermal conductivity gas analyzer has concise menu and simple operation

4. Setting upper andlower alarm values arbitrarily during the measurement range

5. Connected to a computer viathe standard RS232 or RS485 interface.

Technical Specifications of the Infrared Gas Analyzer

Range

0.01%-5%/10%/50%/100%

Accuracy

≤±2% in full FS range

Stability

Zero drift ≤±2% of FS/7d Range drift ≤±2% of FS/7d

Repeatability

≤±0.5%

Warm-up

≤7 minutes

Response Time

90% of final FS reading≤ 30 seconds

Fluctuated Output

0.5% F.S.

Ambient Temp.

-10℃ to 60℃

Ambient Humidity

≤80%RH

Sensor Principle

Thermal Conductivity Sensor

Sample Gas Flow

400ml±10ml/mim

Sample Gas Pressure

0.05MPa≤Inlet pressure≤0.45Mpa

Power Supply

220±10% VAC, 50/60Hz, power loss≤15VA

Warranty

12 months analyzer - 12 months sensor

Weight

4 Kg

Installation Dimension:

482.5 mm × 177 mm × 300 mm (W×H×D)

Our company is a specialized thermal conductivity gas analyzer manufacturer inChina. In addition, we also provide dew point analyzer, oxygen analyzer,infrared gas analyzer, hydrogen analyzer and much more.

Scan QR to Read
Links：https://www.globefindpro.com/products/93162.html