Filters

Filters

A filter is used to removeharmful impurities.
Our company supplies various models of filters including:

Importance of Filter
The commonly seen filters include air filter, oil filter and fuel filter.The filter is an indispensable part of internal-combustion engines, aircompressors, and a variety of presses. It is very important for an engine inthat the use of a poor filter or no filter leads to the short life of theengine, fuel starvation, reduced power, black smoke, difficult startup, orcylinder seizing, etc.

Functions of Air Filter
The airfilter of an engine is compared to lungs of human body.
The air filter protects an engine from dust particles, enabling efficientcombustion through purifying the air in the combustion chamber. By reducinggathered dust, it is able to prevent early abrasion of engine parts and blacksmoke, and ensure smooth running of the engine.

Functions of Oil Filter
The motor oilfilter works kind of like the human kidney.
The filter inside the engine lubricating system serves the purposes ofhindering metallic particles caused by high-speed engine running and dust andsand prevention during oil refilling. Chemical substances formed under hightemperature and high engine speed are removed by the filter. The oil filter bocks sand, dust and metallic impuritiesto ensure purified lubricating system, reduced wear of parts, and thus extendedservice life of the engine.

Functions of Fuel Filter
The fuel filter is similar to the tongue and digestive system of humanbody.
The filter functions as a protector for the fuel of an engine. It filters offthe airborne moisture in fuel and contaminants caused in the process of fuelmanufacture and transportation. With oil-water separation and deposition, thefilter protects the fuel pump and fuel spray nozzle from early abrasion andextends their lifetime.

Use and Maintenance Guide for Motor Oil Filter
1. Change the oil filter every 10000-12000 kilometers or 200-250 hours.
2. When installing a new oil filter, first apply a thin a layer of oil to thesurface of the gasket ring, and then tighten the filter before turning 3/4around. You can start the engine and keep it running for 2-3 minutes to checkif there is any oil leakage.
3. Regularly pay attention to the oil pressure and alarm lamp when the engineoperates. Change a new oil filter in case of too low oil pressure.

Useand Maintenance Guide for Diesel Oil Filter
1. Drain theaccumulated water from the diesel filter each week.
2. Change it every 10000-12000 kilometers or 200-250 hours.
3. The installation method is the same as that for a motor oil filter.

Use and Maintenance Guide for Air Filter
1. As the air filtering system bears negative pressure and outside air willenter it freely, air-tightness is essential for all joints (such as pipes andflanges) except the air inlet.
2. Check the filter every day before operation. Make sure it is clean, with nothick accumulation of dust. Install it correctly.
3. In case that the filterelement is deformed or unable to clean dust, replace it under the guidance of atechnician.

Materialsof Filters
PA 1981: iron cover, net, and medium-grade wood pulp paper
RS3517: polyurethane (PU) adhesive, net, and medium-grade wood pulp paper
BT338: iron sheet, three pieces of thick threaded cover plates, and filter paper

Packaging: carton packaging
Minimum order quantity (MOQ): 100 PCS

As an experienced filter manufacturer and supplier in China, we at FUDEAprovides a wide range of products that includes filters, track bolt, track nut,boom arm, excavator cutting edge, bucket bushing, bucket pin, and others.