SPL Manual Changeover Switch

SPL Manual Changeover Switch

SPL-40A~3150A the onload changeover switch is suitable for the change over of two sets of low voltage electric circuit, the change over of two sets of load devices or for safety isolation.

Applications

SPL-40A~3150A on load changeover switch is mainlysuitable for circuits of AC 50Hz, rated voltage to690VAC, DC rated voltage up to 440VDC, rated current up to 3150A.

General Information 

Pole

The kind of onloadchangeover switch has 3 poles and 4 poles (3 poles on and off neutral pole)

Current

40A, 63A,80A, 100A, 125A, 160A,200A, 250A, 315A, 400A,500A, 630A, 1000A, 1250A,1600A, 2000A, 2500A, 3150A.

Operationmode

Direct operation: the handle is installeddirectly in the middle of the switch.

Operation out side the board: the handle isinstalled outside the door of distributing board.

Extended shaft is used for the operationoutside the board.

Two sets of auxiliary contacts can beassembled according to the demand.

Bridging bars can be provided to connectthe inlet or outlet terminal of the switch.

Note: if the bridging bars connection ischosen, an explanation is needed to indicate the inlet or outlet connected withit.

We are a manual changeover switch manufacturer and supplier in China. At Salzer we offer various types of products such as a cam switch, push button switch, high temperature wire, and isolator switch. In addition, axial fan and fan filter are also available.