Oscilloscope
Oscilloscope
Specifications
Vertical Deflection
| Sensitivity and accuracy | 5mV-20V/DIV, ±3% |
| 1mV-1V/DIV, ±5% | |
| (X5 times, CH1 only) | |
| in 12 calibrated steps of a 1:2:5 sequence | |
| Band-width | DC (AC 10Hz)-20 MHz (Bsoldering5020) |
| DC (AC 10Hz)-40 MHz (Bsoldering5040) | |
| Rise Time | V/17.5 ns (Bsoldering5020) |
| V/8.75 ns (Bsoldering5040) | |
| Input coupling | AC, GND, DC |
| Input impedance | About 1M Ω//30PF |
| Max input voltage | 400V (DC AC peak) |
| Vertical mode | CH1, CH2, DUAL (CHOP, ALT), ADD,CH2 backwards |
| CH1 Signal Output | 25mV/DIV into 50Ω, 20Hz-10M Hz (-3dB) |
Horizontal Deflection
| Time Base | 0.2μS-0.2S/DIV in 19 steps of a 1:2:5 sequence |
| Sweep Magnification | 10 times (max sweep rate 20ns/DIV) |
| Accuracy | ±3%, ±5% X10 times |
Trigger
| Trigger mode | AUTO, NORM, TV-V, TV-H |
| Trigger source | VER (DUAL, ALT), CH1, EXT, LINE |
| Trigger coupling | AC |
| Trigger slope | , - |
| External trigger input | Input impedance: About 1MΩ |
| Max input voltage: 400V (DC AC peak) | |
| Sensitivity inside | 20Hz-2M Hz: 0.5 DIV (0.2Vp-p) |
| (Outside) | 2M Hz-20M Hz: 1.5DIV (0.8Vp-p) |
| 20M Hz-40M Hz: 1.5DIV (0.8Vp-p) | |
| TV signal | 1DIV (1Vp-p) |
X-Y operation
| Input | X axis: CH1 input signal |
| Y axis: CH2 input signal | |
| Band-width | X axis: Bsoldering5020: DC-500KHz (-3dB) |
| Bsoldering5040: DC-1MHz (-3dB) | |
| Phase difference | < 3°(DC-50KHz) |
X axis
| Input impedance | 20KΩ-30KΩ |
| Input signal | 5Vp-p (negative going signal increases intensity) |
| Frequency response | DC-2MHz |
| Max input voltage | 30V(DC AC peak) |
Calibrator
| Output voltage | 0.5Vp-p rectangular wave 1KHz |
Others
| Power supply | AC220V±10% 50Hz±5% |
| Power consumption | 45W |
| Dimensions | 316(L)*135(W)*410(H) mm |
| Temperature range | 0℃-40℃, 85%RH |
| Weight | About 7.8kg |
Scan QR to Read
Links：https://www.globefindpro.com/products/95915.html
Links：https://www.globefindpro.com/products/95915.html
Recommended Products
Hot Products
