Home Pipe Thread Lathe S1-245B, S1-262A, S1-320

Pipe Thread Lathe S1-245B, S1-262A, S1-320

Pipe Thread Lathe S1-245B, S1-262A, S1-320

 



SMTCL pipe thread lathe is designed primarily for the cutting of cylindrical and tapered metric or inch threads on pipe. In addition, it can also be used for turning externally or internally, for boring holes, turning male or female tapers, and face turning, among other operations.
This pipe thread lathe is applicable in the petrochemical, chemical, hydroelectric power generation, and geological industries, and also for repairing drill string, drill collar, square Kelly, well casing, and so forth. Moreover, our lathe is especially suitable for the repair of pipe in the petroleum related industries.

Pipe Thread Lathe S1-245B, S1-262A, S1-320




Main Technical Specifications of Pipe Thread Lathe


Item Unit S1-245B S1-262A S1-320
Main spec. Max. outer diameter of pipe mm 60-219 114-340 219-508
Max. length of turning (travel of saddle) mm 1000/1500 1000/1500/3000 1500/3000
Max. center distance (for tailstock) mm 1000/1500 1000/1500/3000 1500/3000
Height from spindle center to guideway surface mm 400 450 500
Height from spindle center to ground mm 1100 1150 1200
Spindle Dia. of spindle bore mm 240 355 515
Taper in front and rear taper bore of spindle bore 1:50 1:50 1:50
Step of spindle speeds 12 12 12
Range of spindle speeds r/min 8-306 5.6-254 6-200
Feed system Amount of longitudinal and cross feed: number of kind 32 32 32
Range of longitudinal feed mm/r 0.095-1.44 0.095-1.44 0.1-1.5
Range of cross feed mm/r 0.095-1.44 0.095-1.44 0.1-1.5
Range of whitworth threads t/in 1-14 1-14 2-28
Range of metric threads mm 1-15 1-15 1-15
Range of module threads mm 0.5-7.5 0.5-7.5 0.5-7.5
Range of diametral pitch threads t/in 28-2 28-2 56-4
Slide and saddle Vertical distance from spindle centerto bearing surface of tool mm 33 33 48
Cross-section dimension of tool mm 32×32 32×32 45×45
Swing angle of middle slide ˚ ±90 ±90 ±90
Max. cross travel of lower slide mm 300 300 560
Max. travel of top slide mm 200 200 300
Cross rapid moving speed of tool post m/min 4 4 4
Taper ratio and tailstock Max. length of taper of continuous turning workpiece mm 500 500 500
Max. lateral taper attachment adjustment mm 100 100 100
Diameter of center quill mm 100 100 160
Travel of center quill mm 250 250 800
Taper in center quill Morse No.5 Morse No.5 Morse No.6
Taper in center Morse No.5 Morse No.5 Morse No.6
Distance of cross moving of tailstock mm ±15 ±15 ±20
Motor Power of main motor kW 18.5 18.5 22
Speed of main motor r/min 1500 1500 1500
Overall dimensions Length mm 3882.5/4190 3700/4190/5720 4829/6309
Width mm 1908/1974 1908/1974/1974 1750/1832
Height mm 1500/1500 1620/1620/1620 2230/2230
Net weight of machine kg 7876/8500 7876/8500/11200 12500/15000


Item Specification S1-245B 1000/1500 S1-262A 1000/1500 S1-262A 3000 S1-320 1500 S1-320 3000
4-jaw chuck φ630
φ785
φ1000
φ1400
Cooling
Iillumination
Electric cabinet
Oil gun
Tools
Center 5 S25-2
Jaws
Taper attachment
Adjustable pads
Digimatic micrometer
T-slot slide
Steady rest φ40-φ350
φ80-φ330
φ100-φ350
φ140-φ260
φ219-φ508
φ219-φ520
Thread cutting dial











Recommended Products
Hot Products