HP9116C & HP9316C series 6-20kVA UPS

Send Message Request a Quote

HP9116C & HP9316C series 6-20kVA UPS

Applications of HP9116C & HP9316C series 6-20kVA UPS
HP9116C & HP9316C series 6-20kVA is quite suitable for servers, data centers, critical network devices, sensitive electronic equipment, telecommunications, etc.

Features of HP9116C & HP9316C series 6-20kVA UPS
1. Designed with true on-line double conversion technology, and employs advanced microprocessor control.
2. Wide input voltage.
3. Zero transfer time.
4. Protection against all types of power problems.
5. No add-on CNTL unit required for parallel connection.
6. Site wiring fault warning.
7. Low initial investment and flexible for future expansion.
8. Good reliability and performance for power sharing and redundancy.
9. Equipped with maintenance bypass switch.

10. Smart RS232 communication interface.
11. Intelligent slot is available.
12. Sealed, lead-acid, and maintenance free battery.

Features
1. Adopts LCD to display the detailed real-time UPS status.
2. Microprocessor control guarantees high reliability.
3. Equipped with boost and buck AVR to stabilize input voltage.
4. Built-in DC start function is designed to start UPS while AC power supply is unavailable.
5. HP9116C & HP9316C series UPS products are installed with smart RS-232 communication port. You can download software from the internet.
6. User-replaceable battery design.
7. Auto charge even though UPS is off.
8. Auto restart while AC recovery.
9. Provides modem or phone line surge protection.
10. Provides discharge, overcharge, and overload protection.
11. USB port is available upon request.

Technical Specifications

Product series		HP9116C 6 - 10kVA (1 PH / 1 PH)				HP9316C 10 - 20kVA (3PH / 1PH)
Model number		6KT	10KT	6KT-XL	10KT-XL	10KT-XL	15KT-XL	20KT-XL
Rated power	Volt-amps/Watts	6kVA/4.2KW	10kVA/8KW	6kVA/4.2KW	10kVA/7KW	10Kva/7KW	15Kva/10.5KW	20Kva/14KW
Input	Low line transfer	176VAC ± 3VAC				304VAC ± 3VAC
	Low line comeback	185VAC ± 3VAC				322VAC ± 3VAC
	High line transfer	276VAC ± 3VAC				478VAC ± 3VAC
	High line comeback	266VAC ± 3VAC				461VAC ± 3VAC
	Frequency range	50Hz, 46-54Hz, 60Hz, 56-64Hz.
	Power factor	≥ 0.98				≥ 0.95
	Phase	Single Phase with ground				Three phase (4 Wires ground)
	Connection	Hardwired
Output	Voltage	220VAC or 230VAC or 240VAC
	Voltage regulation	± 1%
	Frequency	Synchronization range (line mode); 50 or 60Hz × (1 ± 0.05% ) Hz (battery mode)
	Power factor	0.7 or 0.8
	Wave form	Pure sine wave
	Phase	Single phase
	Voltage distortion	≤ 2% THD (linear load), ≤ 6% THD (non - linear load)
	Overload capability	105%~130% for 10 min., more than 130% for 1 second
	Current crest ratio	3:1 max
	Connection	Hardwired
Battery	Type	Valve regulated, sealed, lead-acid		External battery bank
	Nominal DC voltage	240VDC
	Backup time (full load)	7 min	5 min	Depends on the external battery capacity
	Recharge time	7 hours to 90%	8 hours to 90%	Depends on the external battery capacity
	Charge current (max.)	2A		4.2A
	Charge voltage	274Vdc ± 1V
Transfer time	AC to DC	0 ms
	Inverter to bypass	2.5 ms (typical)
Indicators	Status	Load level / battery level, battery, utility power, inverter, bypass, overload, fault.
Audible alarm	Bypass	Alarm beeps every two seconds
	Battery discharge	Alarm beeps every four seconds. Alarm beeps every one second if battery capacity is low.
	Overload	Alarm beeps twice every one second
	Fault	Alarm beeps continuously
Maintenance bypass switch		Yes
Communications interface	DB-9 Port	RS-232 serial interface
	Intelligent slot	Options: SNMP card, AS400 card or Win power CMC / (USB port)
Parallel port		Availability of up to three units in parallel for power redundancy and load sharing
Environment	Operating temperature	0 ~ 40℃
	Operating humidity	20 ~ 90% non-condensing
	Noise level	Less than 55dB@1 meter					Less than 60dB@1 meter
Physical feature	Weight net (Kg)	90	93	35	38	39	55
	Body size W×D×H (mm)	260×570×717

Scan QR to Read
Links：https://www.globefindpro.com/products/96431.html

HP9116C &amp; HP9316C series 6-20kVA UPS

HP9116C & HP9316C series 6-20kVA UPS