FEATURES :
SPECIFICATIONS :
Item | Specifications | |
Zone quantity | 6 zones, 2 channel outputs with amplifier in each zone | |
Function Of Infrared Remote Controller | May control all system functions of zone 1 | |
Zone Remote Control Pad | Remote Control Function | It is available to control all system functions in each zone. |
Communication Cable | Twin wire, twisted line or parallel line(diameter >0.5mm, circuit resistance <50Ω) | |
Communication Distance | within 300 m | |
Maximum Quantity | 6, all in parallel, setting up the address of control pad in each zone through jumper wire method. | |
Audio Specifications | Input Sensitivity | 250mV±25mV |
Input Resistance | >10KΩ | |
Zone Output Power | 20W/4Ω(distortion ≤1%) (all zone total power≮150W) | |
Frequency Response | 20Hz-20kHz±0.5dB | |
Total Harmonic Distortion (THD) | Less than 0.2%, at 1 kHz, 1/3 rated output power | |
Output Adjustment Rate | From full load down to no load, less than 3dB | |
Tone Control | Bass: ±10 dB/100 HzTreble: ±10 dB/10 kHz | |
Signal/Noise | Better than 76dB | |
Power Supply | AC220V 50/60Hz | |
Consumed Power | <200W | |
Protection | AC220V/F4A | |
Dimensions | 485×88×345mm | |
Net weight | 8Kg |
HM20R | ||
No. | Item | Specifications |
1 | Connection Method With Control Unit | Twin wire, twisted line or parallel line (diameter >0.5mm, circuit resistance <50Ω) |
2 | Infrared Remote Control | It is available to control all operations in one zone with an infrared remote controller. |
3 | Communications Distance | within 300m |
4 | Address Setup | Jumper wire setup, 6 zones with 6 unique address |
5 | Control Function | Available for music source selection, Treble, Bass, volume and zone switch on/off function |
6 | Power Supply | 30V±3V, electric power and data are transmitted in the same line. |
7 | Dimensions | 86×86×25mm (not including the chassis) |
8 | Net weight | 66g |
Specifications are subject to change without notice.