ABS20 Rotogravure Printing Machine

Send Message Request a Quote

Features of Rotogravure PrintingMachine :
Equipped with fixing printing cylinder with shaft, six units of motor tensioncontrolling system, Panasonic PLC controller and protection system, thisprinting machine is reasonable in design, easy to operate, middle speed ofprinting, accurate in color topping, economical of material consumption.Besides, some key parts are imported. It is economical machine and suitable forsmall-middle printing company for investment at the beginning. This machine iswidely used for continuous multi-color printing on reel-shaped film materials.

Technical Parameters of Rotogravure Printing Machine :

Items	Description
Printing direction	from left to right
Printing color number	6
Max printing width	850mm
Max mechanical Speed	130m/min
Printing cylinder diameter	Ф120mm-Ф300mm
Overprint precision	Vertical:±0.15mm Horizontal:±0.2mm(hand control)
Un-winder diameter	Ф600mm
Re-winder diameter	Ф600mm
Tension adjusting range	30-20kg
Re-winder paper core	Ф76mm (inside diameter)
Air pressure	0.6Mpa
Force of impression	400kg
Scraper play	±5mm
Dry method	Electrical heating
Dry power utilization	120kw (warm-up), 60kw (normal operation)
Main motor power	7.5kw
Total power	115kw
Overall dimension	13600×2700×2700（mm）
Weight	15000kg
Ink feeding method	Feeding ink by pneumatic pump circularly
Re-winder, un-winder shaft	Air shaft Ф76mm

Base & Compound Material of RotogravurePrinting Machine :

Items	Description
PET	12-60um
BOPP	19-60um
NY	12-50um
Compound film	15-60um
OPP	19-60um
CPP	19-60um
PE	30-100um

Un-winder Parts of Rotogravure Printing Machine :

Items	Description
Freestanding tower type double arm, & double station whirling stand and wallboard stander	1 set
Web used 3” pneumatic shaft	2 pcs
50N.M magnetic powder brake	2 sets
Pressure sensor	1 set
Web turning AC gear down motor 0.75KW	1 pc
Operation controlling box	1 pc

In-feeding of Rotogravure Printing Machine :

Items	Description
Separate draught stander composed of cast iron wallboard and transom	1 set
Steel roller Ф125mm	1 pc
Rubber roller Ф120mm NBR (70°-75A)	1 pc
50Nm magnetic Powder brake	1 set
Pressure sensor	1 set
Operation controlling box	1 pc

Printing Unit of Rotogravure Printing Machine :

Items	Description
Printing set composed of cast iron wallboard transom	6 sets
Transmission device	6 sets
Vertical photo-electricity auto color control	5 sets
Pneumatic doctor blade device	6 sets
Ink plate elevating	6 sets
Printing ink cycle device	6 sets
Impression rubber roll 75º-80º	6 pcs
Register around error adjust device	6 sets
Impression cylinder ф63*125	12 pcs
Operation electric box	6 pcs

Dry Unit of Rotogravure Printing Machine :

Items	Description
Separate sirocco dry box (Nozzle: 5pieces material length: 1200mm)	6 pcs
Heating box	6 pcs
AC 1.5KW sirocco blower	6 pcs
Stainless steel electrical heating pipe 2.5kw/piece	36 pcs

Out-feeding of Rotogravure Printing Machine :

Items	Description
Separate draught stander composed of cast iron wallboard and transom	1 set
Steel roller ф125mm	1 pc
Rubber roller ф120mm NBR (70°-75A)	1 pc
50Nm magnetic powder clutch	1 set
Pressure sensor	1 set
Operation controlling box	1 pc

Re-winder Unit of Rotogravure Printing Machine :

Items	Description
Freestanding tower type double arm, & double station whirling stand and wallboard stander	1 set
Web used 3” pneumatic shaft	2 pcs
Moment motor	2 sets
WEB turning AC gear down motor 0.75KW	1 pc
Operation controlling box	1 pc

Stander of Rotogravure Printing Machine :

Items	Description
Distance between two color sets	1450mm
Guide roller length	900mm
Screw pitch	36mm

Electric Controlling System of RotogravurePrinting Machine :

Items	Description
Main control system PLC	Panasonic from Japan 1 set
Vector transducer	Yaskawa from Japan 1 set
5.7” black and white interface	from Taiwan 1 piece
Low voltage electrics	1 bulk

Register System of Rotogravure Printing Machine :
Auto register controlsystem           1 set
Register remote controllingbox            5 pieces
Electrostatic EliminationSystem            Selfdischarge eliminator
Accessories of Rotogravure Printing Machine :

Items	Description
Shelf for printing cylinder	1 pc
Trolley for Material	1 set
Tools and tool box	1 set
Ladder	Ladder

Main Equipment List of Rotogravure PrintingMachine :

Items	Descriotion
PLC	Panasonic from Japan
Main motor	AC7.5kw AC vector motor (ABB) 1 set (With Yaskawa, Japan digital AC frequency conversion Control system)
Un-winder tension control system	PLC control Panasonic from Japan 50Nm magnetic powder brake 2 pc
In-feeding traction tension system	PLC control Panasonic from Japan 50Nm magnetic powder brake from Taiwan 1 pc
Out-feeding traction tension system	PLC control Panasonic from Japan 50Nm magnetic powder clutch from Taiwan 1 pc
Re-winder motor	Moment motor 2 pc
Main machine	HITECH from Taiwan 1 pc
Tension sensor	30kg METTLER from America 6 sets
Temperature control	Fuji from Japan 6 sets
Pneumatic main part	AIRTAC 1 bulk
Guide roller	Φ80mm, Φ100mm 1 bulk
Membrane pump	from Wuhan, China 6 sets
Ф76mm Un-winding air shaft	from Changzhou, China 2 pcs
Ф76mm Re-winding air shaft	from Changzhou, China 2 pcs
Vertical auto register control	from Huamao, China 1 set

Note: There are some kinds of assorteddevices user should install:

Items	Description
Electrical power:	tri-phase five-wire system 380V
Air supply:	Pressure more than 8KG/CM2 dry air
Water supply:	Pressure more than 2KG/CM2
Exhaust fan:	5.5kw, wind pressure: 1200Pa, flux 9000m3/h

We can offerbag making machine, laminating machine,slittingmachine, and label cutting machine.

Scan QR to Read
Links：https://www.globefindpro.com/products/97615.html