Home Single Core Prefabricated Branch Cable 0.6/1kV (PVC Insulated Sheath)

Single Core Prefabricated Branch Cable 0.6/1kV (PVC Insulated Sheath)



Single Core Prefabricated Branch Cable 0.6/1kV (PVC Insulated Sheath)

Product Standards
The single core prefabricated branch cable is manufactured in compliance with the GB/T12706.1-2001, JG/T147-2002 or JCS 376A-1992 standards.

Operating characteristics
1. Insulation resistance≥200МΩ/km
2. HV test ≥3.5kV/1min
3. Our single core prefabricated branch cable features good air tightness and water resistance. i.e. if the pre-branch cable is immersed into water, the insulation resistance and HV test should meet the requirement of clause 1 and 2.
4. It has a low contact resistance. The ratio of contact resistance and basis resistance on the same length of pre-branch cable is no more than 1.2.
5. This single core prefabricated branch cable stands out with high short circuit strength on contact points. The contact resistance ratio is no more than 0.2 after short circuit.
6. Time of self-extinguishing for FR pre-branch cable is no more than 12s.
7. FR pre-branch cable can keep operating for 90min during fire disaster.
8. The maximum operating temperature for Cu conductor PVC insulated pre-branch cable is 70℃.
9. The maximum operating temperature for Cu conductor XLPE insulated pre-branch cable is 90℃.
10. Our single core prefabricated branch cable features good corrosion resistance, resisting attack by various corrosive agents such as inorganic salt, oil, acid and organic solvent.
11. The ambient temperature should be no less than 0℃ during installation.

Main Advantages of Pre-branch Cable

Reliable Power Supply
1. Since there is no joint in main cable conductor, the pre-branch cable possesses good continuity. With good DC resistance, the number of potential failure points is largely reduced.
2. Connection between branch cable and main cable is accomplished with advanced impaction technology. The entire branch is made by full mechanical operation, therefore inaccurate man-made operation is avoided.
3. The contact resistance of branch cable is extreme tiny which gives it strong temperature stability.
4. The over sheath is manufactured in very short period to avoid the copper conductor to be oxidized. This ensures the contact resistance not to be changed.

Distribution Cost Reduction
1. It is much cheaper compared to sealed generatrix installation and allows randomly assembly at reduced project cost.
2. Main cable from 10-10002 and branch cable from 4-240mm2 can be randomly assembled upon request.
3. The branch position can be adjusted according to specific power distribution requirement.

Easy Installation and Construction
1. It covers a very small construction area and has no dimension requirement for construction.
2. Our single core prefabricated branch cable features low installation precision and is therefore easy to install. It can be directly laid in cable trench, silo and different cable bridges, etc.
3. The small bend radius greatly simplifies its installation,
4. Pre-branch cable requires low labor intensity and short installation period. The manpower requires is only one-tenth of common sealed generatrix installation.

Anti-vibration, Air Tightness, Water Resistance and Fire Resistance
1. Pre-branch cable has strong vibration resistance.
2. With good air tightness and water resistance, it can provide power supply under humid condition. In addition, it can be buried directly underground.
3.  FR pre-branch cable can keep operating for 90min during fire disaster.

Maintenance Free
Pre-branch cable system does not require any maintenance during normal operation.

Single Core Prefabricated Branch Cable 0.6/1kV (PVC Insulated Sheath)


Cable Type


Model

Category

Name

Application

FZ-VV

Single core

Copper conductor, PVC insulated, PVC sheathed pre-branch power cable

It is mainly applied to power distribution system with rated voltage up to 0.6/1kV. Pre-branch cable is manufactured and designed according to general construction frame and distributed power net. Our pre-branch cable is widely used in subways, high buildings, hospitals, airports, factories, tunnels, bridges, etc.

Twisted core

FZ-ZRVV

Single core

Copper conduct, PVC insulated, PVC sheathed, FR pre-branch power cable

Twisted core

FZ-NHVV

Single core

Copper conduct, PVC insulated, PVC sheathed FR pre-branch power cable

Twisted core



Production Range


Nominal cross-section of main cable (mm2)

Nominal cross-section of branch cable (mm2)

10

6

16

10

16

25

10

16

25

35

10

16

25

35

50

10

16

25

35

50

70

10

16

25

35

50

70

95

10

16

25

35

50

70

95

120

10

16

25

35

50

70

95

120

150

10

16

25

35

50

70

95

120

150

185

10

16

25

35

50

70

95

120

150

185

240

10

16

25

35

50

70

95

120

150

185

300

10

16

25

35

50

70

95

120

150

185

400

10

16

25

35

50

70

95

120

150

185

500

10

16

25

35

50

70

95

120

150

185

630

10

16

25

35

50

70

95

120

150

185

1000

10

16

25

35

50

70

95

120

150

185


Note: The maximum cross section area of main cable is 300mm2 for both twisted and multi-core pre-branch power cables.


As a professional single core prefabricated branch cable manufacturer and supplier, we at Huanya also provide XLPE insulated cable, PVC insulated control cable, overhead cable, XLPE insulated control cable and fire resistant cable, etc. All our products are manufactured strictly according to the ISO9001 quality management system, resulting in reliable quality. So you can feel secure in choosing our prefabricated branch cables.

For more detailed information, please feel free to contact us.


 




Recommended Products
Hot Products