AUTODP Water Booster Pump

Auto Booster Pump
AUTODP Series

Performance parameters of AUTODP booster pump:
1. Power: 0.75-1hp
2. Suction lift: 7-9m
3. Total head: 28m
4. Flow: 90 L/min
5. Voltage and frequency: 110V/220V, 50HZ/60HZ (Customizable)

Where could we utilize a booster pump:
1. If you are looking for a water pump for water circulation of residential and industrial conditioning systems, Yinjia booster pumps are your best choice!
2. Our boosting pumps are also good solutions for pressure-boosting of small scale water supplying systems.
3. Used for supplying clean water for household water circulation system and small scale irrigation (gardens, farms, etc.) are also possible.
4. Booster system.

Application limits:
1. Maximum operating pressure: 8 bar.
2. Maximum ambient temperature: 40℃
3. Liquid temperature: 60℃
4. Maximum altitude: 1,000m

Design parameters:
1. Pump body: cast iron
2. Impeller: Brass/PPO/"General Electric" Noryl
3. Mechanical seals: NBR/graphite/ceramic
4. Diffusers: Plastic/"General Electric" Noryl
5. Accessories: pressure switch, pressure gauge, 24L expansion tank, and 5-way brass connector

Electrical motor parameters:
1. Single phase/three phase voltage
2. Continuous operating under heavy load is possible
3. Enclosure: aluminium/cast iron
4. Shaft: carbon steel/Welded stainless steel/stainless steel
5. Insulation class: B/F
6. Protection: IP44/IP54
7. Speed of rotation: 2,850rpm
8. Thermal protector is available upon request.

Booster pump standards:
IEC 60034-1
IEC 355-1
IEC 34-1
ISO 2548