DP Deep Well Pump

，，，，。。，。，，。，。30。

Deep Well Pump
DP Series

Performance parameters of DP series deep well pumps:
1. Power: 0.75-1.5hp
2. Suction lift: 7-9m
3. Total head: 27.5-44m
4. Flow: 90 L/min
5. Voltage and frequency: 110V/220V/380V, 50HZ/60HZ (Customizable)

Where could we utilize a deep well pump?
1. They are mainly used to bring water from a deep well, deep pool, etc.
2. This kind of water pump is also applicable for small scale irrigation for gardens and farms.
3. To supply or clean water for low-lying lands, water tanks, wells, and ditches as well as any other places needing high lift head pumps.

Application limits:
Our deep well pumps should be used in a environment satisfying the following conditions.
1. Maximum operating pressure: 8bar.
2. Maximum ambient temperature: 40℃.
3. Liquid temperature: 60℃.
4. Maximum altitude: 1,000m.

Design parameters:
1. Pump body: cast iron
2. Diffusers: plastic/"General Electric" Noryl
3. Impeller: brass or plastic or cast iron
4. Mechanical seals: NBR/Graphite/Ceramic
5. Jet eductors, straight pipes and food valves are available upon request.

Electrical motor parameters:
1. Single phase/three phase voltage
2. Continuous operating under heavy load is possible
3. Enclosure: aluminium/cast iron
4. Shaft: carbon steel/Welded stainless steel/stainless steel
5. Insulation class: B/F
6. Protection: IP44/IP54
7. Speed of rotation: 2,850rpm
8. Thermal protector is available upon request.

Deep-well pump standards:
IEC 60034-1   IEC335-1
IEC34-1           ISO2548