FD, FG 20-30 Diesel Forklift Truck
Features
1. This diesel forklift truck is safe comfortable to use, aesthetic in appearance, durable, and environmentally friendly.
2. It is usually fitted with 4JGZ engine made by ISUZU or 490BPG engine made in China. While offering powerful, reliable power, the high quality engine makes little noise and exhausts little waste gas. Besides, the gear box, front axles and rear axles of this diesel forklift truck are all purchased from well-known manufacturers in China.
3. Power transmission system, overhead guard and truck frame all use dual suspension structure, which can weaken the vibration transferred from power system to steering wheel, control lever and seat, thus making the operator feel more comfortable during operation.
4. This diesel forklift truck is designed with high definition liquid crystal display device which not only provides convenience for operator to understand the working condition of truck, but also broadens the visual field of operator.
5. The embedded inclined cylinder, hanging type braking mechanism and fully sealed front cover not only make the truck look beautiful in appearance, but also effectively keep the operator away from tumult and dust in external environment.
6. The seat can be adjusted back and forth within a wide range and thus can create larger room for a fat operator.
7. The mast system of this diesel forklift truck can slow down the descending speed automatically when the forks are 60mm to 100mm above ground, to prevent goods from impacting onto ground.
8. The three color taillights of the truck can offer high brightness, which can catch the attention of pedestrians or drivers behind the truck and thus avoid accidents.
9. The hydraulic control lever is installed on the right side of seat. This can effectively ease the shoulder fatigue caused by long time driving.
10. This diesel forklift truck can be designed with two stage free lifting mast or three stage mast, luxurious and closed driving room, solid tire, sideshifter, roll clamps, clamp holder, and nonstandard forks, etc., to meet your different needs.
Parameters of FD, FG 20-30 Diesel Forklift Truck
| FD/FG 20-30 mast mountings | Carrying capacity data sheet (kg) c=500mm | ||||||||||
| Designation | Lift height | Free lifting height | Closed mast height | Extended mast maximum height | Mast tilt angle | Without side shifting | |||||
| H3 mm | H2 mm | H1 mm | H4 mm | α/β(°) | Single solid tyre | ||||||
| FD/FG | FD/FG | FD/FG | FD/FG | FD/FG | FD/FG | ||||||
| 20/25/30 | 20/25 | 30 | 20/25 | 30 | 20/25 | 30 | 20/25/30 | 20 | 25 | 30 | |
| Two stage standard type mast | 3000 | 140 | 145 | 1995 | 2070 | 3580 | 6/12 | 2000 | 2500 | 3000 | |
| 3600 | 140 | 145 | 2295 | 2370 | 4180 | 6/12 | 2000 | 2500 | 3000 | ||
| 4000 | 140 | 145 | 2545 | 2620 | 4580 | 6/6 | 2000 | 2500 | 3000 | ||
| 4500 | 140 | 145 | 2795 | 2870 | 5080 | 6/6 | 1800 | 1800 | 2600 | ||
| Two stage free lifting type mast | 3600 | 1295 | 1150 | 2295 | 2370 | 4035 | 4180 | 6/6 | 2000 | 2500 | 3000 |
| Three stage free lifting type mast | 4800 | 1155 | 1070 | 2195 | 2340 | 5235 | 5380 | 6/6 | 1700 | 1700 | 2450 |
| 5500 | 1430 | 1345 | 2470 | 2615 | 5935 | 6080 | 3/6 | 1100 | 1100 | 1600 | |
| 6000 | 1605 | 1520 | 2645 | 2790 | 6435 | 6580 | 3/6 | 800 | 800 | 1200 | |
| 1KG=2.2LB 1INCH=25.4MM | ||||||
| 2.0T | ||||||
| Technical Parameters | ||||||
| Characteristics | 1.1 | Manufacturer (abbreviation) | Hylifting | |||
| 1.2 | Model | FD20A | FD20B | FG20A | ||
| 1.3 | Drive mode: electric drive (accumulator or power supply), diesel fuel, gasoline, fuel gas, manual drive | Diesel fuel | Diesel fuel | Fuel gas/diesel fuel | ||
| 1.4 | Operation mode: manual, walkie, stand-on type, sit-on type, picking type | Sit-on type | ||||
| 1.5 | Rated carrying capacity | Q (kg) | 2000 | |||
| 1.6 | Load center distance | C(mm) | 500 | |||
| 1.8 | Front overhang | X(mm) | 483 | |||
| 1.9 | Wheel base | y(mm) | 1600 | |||
| Weight | 2.1 | Dead weight | Kg | 3410 | 3320 | |
| 2.2 | Load per axle when full load, front/rear | Kg | 4775/635 | 4730/590 | ||
| 2.3 | Load per axle when no load, front/rear | Kg | 1560/1850 | 1520/1800 | ||
| Wheel, truck body | 3.1 | Tyre: solid rubber tyre, high elastic rubber tyre, pneumatic tyre, PU tyre | Pneumatic tyre | |||
| 3.2 | Front wheel tyre size | 7x12 | ||||
| 3.3 | Rear wheel tyre size | 6.00x9 | ||||
| 3.5 | Wheel quantity (front/rear) (x=driving wheel) | 2x/2 | ||||
| 3.6 | Wheel span, front wheel | b10(mm) | 970 | |||
| 3.7 | Wheel span, rear wheel | b11(mm) | 980 | |||
| Size | 4.1 | Mast tilt angle, forward/ backward | α/β(°) | 6/12 | ||
| 4.2 | Retracted mast height | h1(mm) | 1995 | |||
| 4.3 | Free lifting height | h2(mm) | 140 | |||
| 4.4 | Lift height | h3(mm) | 3000 | |||
| 4.5 | Mast maximum height during operation | h4(mm) | 4030 | |||
| 4.7 | Overhead guard (capsule cabin) height | h6(mm) | 2070 | |||
| 4.8 | Seat height | h7(mm) | 1035 | |||
| 4.12 | Hanger height | h10(mm) | 440 | |||
| 4.19 | Total length | l1(mm) | 3423 | |||
| 4.2 | Distance from fork surface to front end | l2(mm) | 2503 | |||
| 4.21 | Truck body width | b1(mm) | 1150 | |||
| 4.22 | Fork size | s/e/l(mm) | 40/120/1150 | |||
| 4.24 | Fork carrier width | b3(mm) | 1100 | |||
| 4.31 | Ground clearance, under mast | m1(mm) | 110 | |||
| 4.32 | Wheel base center ground clearance | m2(mm) | 120 | |||
| 4.33 | Right angle stacking aisle width, pallet 1000×1200 (1200 side placed across forks) | Ast(mm) | 3853 | |||
| 4.34 | Right angle stacking aisle width, pallet 800×1200 (1200 side placed along forks) | Ast(mm) | 4053 | |||
| 4.35 | Turning radius | Wa(mm) | 2170 | |||
| 4.36 | Minimum vertical positioning distance | b13(mm) | 735 | |||
| performance | 5.1 | Driving speed full load/ no load | km/h | 17/19 | 17/19 | 17/19 |
| 5.2 | Lifting speed, full load/ no load | mm/s | 480/560 | |||
| 5.3 | Descending speed, full load/ no load | mm/s | 420/420 | |||
| 5.5 | Drawbar pull, full load/ no load | KN | 18/8.3 | 18/8.3 | 18/8.3 | |
| 5.7 | Gradeability, full load/ no load | % | 22/20 | 22/20 | 22/20 | |
| 5.9 | Acceleration time, full load/ no load | S | 5.4/4.8 | 5.4/4.8 | 5.9/5.2 | |
| 5.1 | Motor brake | Hydraulic pedal-powered | ||||
| Internal combustion engine | 7.1 | Engine model | Xinchang 490BPG | ISUZU4JG2 | NISSAN H25 | |
| 7.2 | Engine power, according to ISO1585 | kw | 37 | 44.9 | 41.1 | |
| 7.3 | Rotary speed | min/r | 2650 | 2450 | 2500 | |
| 7.4 | Air cylinder quantity/air displacement | /cm3 | 4/2540 | 4/3050 | 4/2472 | |
| Others | 8.1 | Drive control mode (hydraulic, mechanical) | Hydraulic | hydraulic | Hydraulic | |
| 8.2 | Working pressure for attachments | bar | 160 | |||
| 8.4 | Noise level in operator's ear, according to EN 12053 | dB(A) | 86 | 84 | ||
| 2.5T | ||||||
| Technical Parameters | ||||||
| Characteristics | 1.1 | Manufacturer (abbreviation) | Boblift | |||
| 1.2 | Model | FD25A | FD25B | FG25A | ||
| 1.3 | Drive mode: electric drive (accumulator or power supply), diesel fuel, gasoline, fuel gas, manual drive | Diesel fuel | Diesel fuel | Fuel gas/gasoline | ||
| 1.4 | Operation mode: manual, walkie, stand-on type, sit-on type, picking type | Sit-on type | ||||
| 1.5 | Rated carrying capacity | Q (kg) | 2500 | |||
| 1.6 | Load center distance | C(mm) | 500 | |||
| 1.8 | Front overhang | X(mm) | 483 | |||
| 1.9 | Wheel span | y(mm) | 1600 | |||
| Weight | 2.1 | Dead weight | Kg | 3770 | 3680 | |
| 2.2 | Load per axle when full load, front/ rear | Kg | 5525/745 | 5480/700 | ||
| 2.3 | Load per axle when no load, front /rear | Kg | 1510/2260 | 1465/2215 | ||
| Wheel, truck body | 3.1 | Tyre: solid rubber tyre, high elastic rubber tyre, pneumatic tyre, PU tyre | Pneumatic tyre | |||
| 3.2 | Front wheel tyre size | 7x12 | ||||
| 3.3 | Rear wheel tyre size | 6.00x9 | ||||
| 3.5 | Wheel quantity (front/ rear) (x=driving wheel) | 2x/2 | ||||
| 3.6 | Wheel span, front wheel | b10(mm) | 970 | |||
| 3.7 | Wheel span, rear wheel | b11(mm) | 980 | |||
| Size | 4.1 | Mast tilt angle, forward/ backward | α/β(°) | 6/12 | ||
| 4.2 | Retracted mast height | h1(mm) | 1995 | |||
| 4.3 | Free lifting height | h2(mm) | 140 | |||
| 4.4 | Lift height | h3(mm) | 3000 | |||
| 4.5 | Mast maximum height during operation | h4(mm) | 4030 | |||
| 4.7 | Overhead guard (capsule cabin) height | h6(mm) | 2070 | |||
| 4.8 | Seat height | h7(mm) | 1035 | |||
| 4.12 | Hanger height | h10(mm) | 440 | |||
| 4.19 | Total length | l1(mm) | 3647 | |||
| 4.2 | Distance from fork surface to front end | l2(mm) | 2577 | |||
| 4.21 | Truck body width | b1(mm) | 1150 | |||
| 4.22 | Fork size | s/e/l(mm) | 40/120/1150 | |||
| 4.24 | Fork carrier width | b3(mm) | 1100 | |||
| 4.31 | Ground clearance, under mast | m1(mm) | 110 | |||
| 4.32 | Wheel base center ground distance | m2(mm) | 120 | |||
| 4.33 | Right angle stacking aisle width, pallet 1000×1200(1200 side placed across forks) | Ast(mm) | 3913 | |||
| 4.34 | Right angle stacking aisle width, pallet 800×1200(1200 side placed along forks) | Ast(mm) | 4113 | |||
| 4.35 | Turning radius | Wa(mm) | 2230 | |||
| 4.36 | Minimum vertical positioning distance | b13(mm) | 735 | |||
| Performance | 5.1 | Driving speed, full load/ no load | km/h | 17/19 | 17/19 | 17/19 |
| 5.2 | Lifting speed, full load/ no load | mm/s | 480/560 | |||
| 5.3 | Descending speed, full load/ no load | mm/s | 420/420 | |||
| 5.5 | Drawbar pull, full load/ no load | KN | 18/8.3 | 18/8.3 | 18/8.3 | |
| 5.7 | Gradeability, full load/ no load | % | 22/20 | 22/20 | 22/20 | |
| 5.9 | Acceleration time, full load/ no load | S | 5.4/4.8 | 5.4/4.8 | 5.9/5.2 | |
| 5.1 | Motor brake | Hydraulic pedal-powered type | ||||
| Internal combustion engine | 7.1 | Engine model | Xinchang 490BPG | ISUZU4JG2 | NISSAN H25 | |
| 7.2 | Engine power, according to ISO1585 | kw | 37 | 44.9 | 41.1 | |
| 7.3 | Rotary speed | min-1 | 2650 | 2450 | 2500 | |
| 7.4 | Air cylinder quantity/ air displacement | /cm3 | 4/2540 | 4/3050 | 4/2472 | |
| Others | 8.1 | Drive control mode (hydraulic, mechanical) | Hydraulic | Hydraulic | Hydraulic | |
| 8.2 | Working pressure for attachments | bar | 160 | |||
| 8.4 | Noise level in operator's ear, according to EN 12053 | dB(A) | 86 | 84 | ||
| 3.0T Technical Parameters | ||||||
| Characteristics | 1.1 | Manufacturer (abbreviation) | Hylifting | |||
| 1.2 | Model | FD30A | FD30B | FG30A | ||
| 1.3 | Drive mode: electric drive (accumulator or power supply), diesel fuel, gasoline, fuel gas, manual drive | Diesel fuel | Diesel fuel | Fuel gas/gasoline | ||
| 1.4 | Operation mode: manual, walkie, stand-on type, sit-on type, picking type | Sit-on type | ||||
| 1.5 | Rated carrying capacity | Q (kg) | 3000 | |||
| 1.6 | Load center distance | C(mm) | 500 | |||
| 1.8 | Front overhang | X(mm) | 498 | |||
| 1.9 | Wheel base | y(mm) | 1700 | |||
| Weight | 2.1 | Dead weight | Kg | 4370 | 4280 | |
| 2.2 | Load per axle when full load, front/ rear | Kg | 6500/870 | 6455/825 | ||
| 2.3 | Load per axle when no load, front /rear | Kg | 1760/2610 | 1720/2560 | ||
| Wheel, truck body | 3.1 | Tyre: solid rubber tyre, high elastic rubber tyre, pneumatic tyre, PU tyre | Pneumatic tyre | |||
| 3.2 | Front wheel tyre size | 28x9-15 | ||||
| 3.3 | Rear wheel tyre size | 6.50x10 | ||||
| 3.5 | Wheel quantity (front/ rear)(x=driving wheel) | 2x/2 | ||||
| 3.6 | Wheel base, front wheel | b10(mm) | 1000 | |||
| 3.7 | Wheel base, rear wheel | b11(mm) | 980 | |||
| Size | 4.1 | Mast tilt angle, forward/ backward | α/β(°) | 6/12 | ||
| 4.2 | Retracted mast height | h1(mm) | 2070 | |||
| 4.3 | Free lifting height | h2(mm) | 145 | |||
| 4.4 | Lift height | h3(mm) | 3000 | |||
| 4.5 | Mast maximum height during operation | h4(mm) | 4250 | |||
| 4.7 | Overhead guard (capsule cabin) height | h6(mm) | 2090 | |||
| 4.8 | Seat height | h7(mm) | 1055 | |||
| 4.12 | Hanger height | h10(mm) | 420 | |||
| 4.19 | Total length | l1(mm) | 3763 | |||
| 4.2 | Distance from fork surface to front end | l2(mm) | 2693 | |||
| 4.21 | Truck body width | b1(mm) | 1225 | |||
| 4.22 | Fork size | s/e/l(mm) | 45/120/1150 | |||
| 4.24 | Fork carrier width | b3(mm) | 1100 | |||
| 4.31 | Ground clearance, under mast | m1(mm) | 135 | |||
| 4.32 | Wheel base center ground clearance | m2(mm) | 135 | |||
| 4.33 | Right angle stacking aisle width, pallet 1000×1200(1200 side placed across forks) | Ast(mm) | 4118 | |||
| 4.34 | Right angle stacking aisle width, pallet 800×1200(1200 side placed along forks) | Ast(mm) | 4318 | |||
| 4.35 | Turning radius | Wa(mm) | 2420 | |||
| 4.36 | Minimum vertical positioning distance | b13(mm) | 810 | |||
| Performance | 5.1 | Driving speed, full load/ no load | km/h | 18/19 | 18/19 | 18/19 |
| 5.2 | Lifting speed, full load, no load | mm/s | 450/530 | |||
| 5.3 | Descending speed, full load, no load | mm/s | 420/420 | |||
| 5.5 | Drawbar pull, full load/ no load | KN | 19.6/9.8 | 19.6/9.8 | 19.6/9.8 | |
| 5.7 | Gradeability, full load/ no load | % | 20/20 | 20/20 | 19/20 | |
| 5.9 | Acceleration time, full load/ no load | S | 6.1/5.3 | 6.1/5.3 | 6.5/5.5 | |
| 5.1 | Service braking | Hydraulic pedal-powered type | ||||
| Internal combustion engine | 7.1 | Engine model | Xinchang 490BPG | ISUZU4JG2 | NISSAN H25 | |
| 7.2 | Engine power, according to ISO1585 | kw | 37 | 44.9 | 41.1 | |
| 7.3 | Rotary speed | min-1 | 2650 | 2450 | 2500 | |
| 7.4 | Air cylinder quantity/ air displacement | /cm3 | 4/2540 | 4/3050 | 4/2472 | |
| Others | 8.1 | Drive control mode (hydraulic, mechanical) | Hydraulic | Hydraulic | Hydraulic | |
| 8.2 | Working pressure for attachments | bar | 160 | |||
| 8.4 | Noise level in operator's ear, according to EN 12053 | dB(A) | 86 | 84 | ||
As a professional diesel forklift truck manufacturer and supplier in China, we know well how to produce high quality diesel forklift trucks, hand pallet trucks, lifting jacks, electric stackers, car tail boards and elevating work platforms, etc. These products have passed GS and CE tests. They sell well in America, Germany, Korea, Singapore, Kazakhstan, and more.
If you are interested in any of them, please contact us.
Links：https://www.globefindpro.com/products/98245.html
