TVVBPG-TV Elevator Flat Cable (Shielded Pairs with Screen, Video, Fiber Optic, Network Wire)

TVVBPG-TV Elevator Flat Cable (Shielded Pairs with Screen, Video, FiberOptic, Network Wire)

Construction

 TVVBPG-TV 300/500V24*0.75 2P*2*0.75 4OPT 2CX75 1CAT5E

Introduction of Elevator Flat Cable
1.Insulation and Sheath: PVC insulation, PVC sheath
2.Shielded Pairs: 0.5mm2 soft drawn stranded copperinsulation core, with bare copper braid for 85%  coverage
3.Coaxial Cable:Impedance 75ohm, Capacitance 56.7 pf/m; Attenuation 21.3dB/100m@10MHz, 5.08dB/100m@50MHz
4.Optical fibre: 62.5/125 A/b Attenuation 3.5 dB/Km@850nm, 1.5 dB/Km@1300nm
5.UTP CAT5e NetworkLine: Frequency 1.0MHZ, characteristic impedance of 100Ω, attenuation of 1.8 ~2.0dB/100m,transfer rate 0.65C.
6. Rated voltage:300/500V
7. Staticflexibility test: 0.3m<L<0.6m
8. Vertical burn test: passed GB/T18380.11-2008, IEC60332-1:2004 tests
9. Product standard: BS EN 50214:2006, GB/T 5023.6-2006

Guide to Using Onitl Elevator Flat Cable
1. The elevatorflat cable is suitable for use in environments where the ambient temperature is between -15℃ to 40℃
2. Under thenormal conditions, the temperature of conductor is lower than 70℃
3.Cables arerecommended forinstallations where the freely suspended length doesn't exceed 400m; and the speed of travel doesn't exceed 10m/s

Cable Scope

 Note: We could design and manufacture the control core, coaxial and network wire, and the number of fiberoptic unitsaccording to customers’ specific requirements.

Onitl isa China elevator flat cable manufacturer and supplier. We offer elevator flat cable,and elevator flat travelling cable, steel rope, PVCinsulated shielded flexible cable. Our high quality products are offered atcompetitive prices. Onitl is located in China, and the full chain of manufacturing PVconnector, elevator compensation weight can be completed in China, even in one city. Lowermanufacturing cost saves your purchasing cost. The more details of each productare shown on the page with description.