TVVBPG-TV Elevator Flat Cable (Shielded Pairs, Wire Rope and Coaxial)

TVVBPG-TV ElevatorFlat Cable (Shielded Pairs, Wire Rope and Coaxial)

Construction
TVVBPG-TV300/500V 36*0.75 2P*2*0.75 1CX75 2S

Introduction of Elevator Flat Cable
1. Insulation and Sheath: PVC insulation, PVC sheath
2. Shielded Pairs: 2*0.75mm2 PVC insulated conductors, shielded with semiconductor material.
3. Coaxial Cable: Impedance 75ohm, Capacitance 56.7 pf/m; Attenuation 21.3dB/100m@10MHz, 5.08dB/100m@50MHz.
4. Wire rope: Φ4.0mm Flexible wire rope, Min. breaking strength 12.92KN.
5. Rated voltage:300/500V
6. Static flexibility test: 0.3m<L<0.6m
7. Vertical burn test: passed GB/T18380.11-2008, IEC60332-1:2004 tests
8. Product standard: GB5023.6, IEC60227-6, EN50214

Guide to Using Onitl Elevator Flat Cable (Shielded Pairs, Wire Rope and Coaxial)   
1. The elevator flat cable is suitable foruse in environments where the ambient temperature is between -15℃ to  40℃
2. Under the normal conditions, the temperature of conductor is lower than 70℃
3.Cables are recommended for installations where the freely suspended length doesn't exceed 150m; and the speed of travel doesn't exceed 6m/s

Cable Scope  

 Note: We at Onitl can also customize our elevatorflat cable according to the requirement of customers.

Onitl is aChina elevator flat cable manufacturer and supplier. We offer elevator flatcable, and PV connector, round travelling cable, steel centre. Our high qualityproducts are offered at competitive prices. Onitl is located in China, and the full chain of manufacturing PVCinsulated wire and cable, PVC insulated control cable can be completed in China, even inone city. Lower manufacturing cost saves your purchasing cost. The more detailsof each product are shown on the page with description.