200-400KG Electric Windlass

Model KDJ-200F KDJ-250F KDJ-300F KDJ-300F1 KDJ-400F1 Features
Transmission structure
The hoist drum is connected to gearbox through two-stage geared coupling, allowing wire ropes to be easily adjusted and replaced.

Wire rope tightening
Put a P.T. screw into the hole of the drum to tighten the wire rope, it can efficiently prevent the wire rope from falling off.

Heavy duty brake
Electromagnetic brake with wear resistant brake disc is adopted, and it features a simple structure without adjusting brake air gap. The brake can be automatically and immediately activated during power failure to efficiently control the lowering of heavy loads, ensuring operation safety.

Motor
The winch can be equipped with three-phase asynchronous motor or single-phase capacitor-run motor to ensure large starting torque, low temperature rise and prolonged service life. All motors are with class B insulation.

Gear
The gears are made of high grade steel which is hardened by heat treatment and precisely processed, featuring good wear resistance, low noise, high efficiency and excellent mechanical performance.

Control system
The handle is designed with low voltage control and protection rating of IP65, guaranteeing a reliable safety. Technical Data

Model	Rated capacity (kg)	Rated speed (m/min)	Lifting height (m)	Wire rope diameter (mm)	Wire rope length (m)	Work level	Motor (kw)	Voltage (v)	Frequency (Hz)	Net weight (kg)
KDJ-200F	200	10-15/12-18	38	Φ6	40	M3	0.75×4	AC100/110/ 120/220/ 230/240	50/60	40
KDJ-250F	250									44
KDJ-300F	300						1.1×4			53
KDJ-300F1	300	10-15						Three phase 230/380/415/ 440/480		52
KDJ-400F1	400	12-18					1.5×4			55