300W Wind Turbine Generator

Send Message Request a Quote

Description of 300W Wind Turbine Generator
The nacelle contains the main structural backbone of the wind turbine generator,assembly the yaw bearings and the tower mount. The yaw bearings allow the windturbine to freely pivot around the tope of the tower so that the rotor willface into the wind.

Features of 300WWind Turbine Generator
Low-speed permanent magnet generator
Low starting torque, High generating efficiency
Wood–epoxy high efficiency blades
Proper mechanical structure designed by GH Bladed software
Neodymium magnets and bearing with high performance
Pre-yaw design for tail vane
Minimal maintenance
CE certified

Specification of Wind Turbine Generator

Model	WT-7
Rotor diameter (m)	2
Material of blade	Wood-epoxy
Number of blade	3
Speed regulation	Yaw regulating, Electromagnetic brakes and Passive stall regulating for blades
Working range (m/s)	3～25
Cut-in wind speed (m/s)	3
Rated wind speed (m/s)	8
Survived wind speed (m/s)	50
Output rated power (w)	300
Maximum output power(w)	450
Rated voltage (v)	DC24
Generator type	3 phase AC permanent magnet
Weight (Kg)	35

Power Curve of Wind Turbine Generator

Wind and solar hybrid Controller
Features
Intelligent battery management with PWM charging
Reverse connection protection, open-circuit protection,
Dump load protection, over voltage protection
water proof
Wireless port for remote control (optional)

Specification of hybrid Controller in WindTurbine Generator

Input rated power (W)	≤ 600
Maximum charge current (A)	DC 30
Dual output (W)	2x120
Idle Loss (mW)	≤ 20
Ambient temperature	-20 ℃-- 50℃
Protection level	IP 65
Dimension (mm)	280x199x90