MIG Welding Machine / Inverter Welder

MIG 145E Features Equipped with RILAND’s self-developed RICHI chip and use the advanced IGBT inverter technology; High performance in GASLESS modes, available to 1kg flux-cored self-shield wire, actually welding without gas; Digital display and with MMA function; Automatic identification of wire diameter, easy to adapt to 0.8 and 0.9mm wire welding; Expert parameters built-in, synergic control the voltage and current for easy and better welding; Stable welding performance on small current around 40A, enhancing the capacity to weld thinner metal, even 0.8mm sheet; Wire inching function acts as you press the trigger about 3s under no load; Fan as needed, reduce noise and dust inside the machine; Compact and portable (6kg) with handle, and reserved shoulder strap mounting holes; Intelligent protection: over-current, over-voltage, over heating protection; Specifications

Item	MIG 145E		MIG 145E
Power supply (V)	1 phases 120V±15%		1 phases 230V±15%
Frequency (Hz)	50/60		50/60
Welding process	MIG(FCAW)	MMA	MIG(FCAW)	MMA
Rated input current (A)	25.1 (Ieff=13.8)	27.2 (Ieff=12.2)	13.1 (Ieff=7.2)	14.2 (Ieff=7.8)
Welding current range (A)	30-125	40-100	30-125	40-100
Output voltage range (V)	15.5-19	20.8-23.2	15.5-19	20.8-23.2
No-load voltage (V)	56		56
Duty cycle,40℃	90A/30%	80A/20%	90A/30%	80A/20%
Power factor	≥0.71		≥0.71
Efficiency (%)	≥80%		≥80%
Type of wire feeder	Internal	/	Internal	/
Welding-wire diameter (mm)	0.8/0.9(flux-cored wire)	1.6/2.0/2.4/(3.2)	0.8/0.9(flux-cored wire)	1.6/2.0/2.4/(3.2)
Insulation class	F		F
Protection grade	IP21		IP21
Weight without wire roller (kg)	6		6
Dimension (L×W×H) (mm)	330×168×257		330×168×257

Package Included

Steel brush hammer

Earth clamp

0.8mm flux-cored wire, 0.5kg

Fixed MIG torch with cable
Applications
Optional Welding Accessories

Handheld welding mask

Shoulder strap

1 set electrode holder